| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Core Processor | Number of Cores/Bus Width | Speed | Co-Processors/DSP | RAM Controllers | Graphics Acceleration | Display & Interface Controllers | Ethernet | SATA | USB | Voltage - I/O | Operating Temperature | Grade | Qualification | Security Features | Mounting Type | Supplier Device Package | Additional Interfaces |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC68030RC33CIC MPU M680X0 33MHZ 128PGA |
290 |
|
Datasheet |
128-BPGA | M680x0 | Tray | Obsolete | 68030 | 1 Core, 32-Bit | 33MHz | - | - | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Through Hole | 128-PGA (34.55x34.55) | SCI, SPI |
|
MPC860DPZQ66D4IC MPU MPC86XX 66MHZ 357BGA |
132 |
|
Datasheet |
357-BBGA | MPC86xx | Bulk | Active | MPC8xx | 1 Core, 32-Bit | 66MHz | Communications; CPM | DRAM | No | - | 10Mbps (2), 10/100Mbps (1) | - | - | 3.3V | 0°C ~ 95°C (TJ) | - | - | - | Surface Mount | 357-PBGA (25x25) | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
|
MC68A02CLMC68A02CL |
371 |
|
Datasheet |
- | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MC68020FE25EIC MPU M680X0 25MHZ 132CQFP |
1,141 |
|
Datasheet |
132-BCQFP | M680x0 | Tray | Obsolete | 68020 | 1 Core, 32-Bit | 25MHz | - | - | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Surface Mount | 132-CQFP (24x24) | - |
|
MC68020FE25EIC MPU M680X0 25MHZ 132CQFP |
935 |
|
Datasheet |
132-BCQFP | M680x0 | Bulk | Active | 68020 | 1 Core, 32-Bit | 25MHz | - | - | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Surface Mount | 132-CQFP (24x24) | - |
|
MC68020FE20EIC MPU M680X0 20MHZ 132CQFP |
478 |
|
Datasheet |
132-BCQFP | M680x0 | Bulk | Active | 68020 | 1 Core, 32-Bit | 20MHz | - | - | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Surface Mount | 132-CQFP (24x24) | - |
|
|
MPC8545VTAQGBIC MPU MPC85XX 1.0GHZ 783FCBGA |
104 |
|
Datasheet |
783-BBGA, FCBGA | MPC85xx | Tray | Obsolete | PowerPC e500 | 1 Core, 32-Bit | 1.0GHz | Signal Processing; SPE | DDR, DDR2, SDRAM | No | - | 10/100/1000Mbps (4) | - | - | 1.8V, 2.5V, 3.3V | 0°C ~ 105°C (TA) | - | - | - | Surface Mount | 783-FCBGA (29x29) | DUART, I2C, PCI, RapidIO |
|
|
MPC8541VTAJDIC MPU MPC85XX 533MHZ 783FCPBGA |
4,896 |
|
Datasheet |
783-BBGA, FCBGA | MPC85xx | Bulk | Obsolete | PowerPC e500 | 1 Core, 32-Bit | 533MHz | - | DDR, SDRAM | No | - | 10/100/1000Mbps (2) | - | - | 2.5V, 3.3V | 0°C ~ 105°C (TA) | - | - | - | Surface Mount | 783-FCPBGA (29x29) | DUART, I2C, PCI |
|
NSC800N-4IMICROPROCESSOR, 8 BIT, 4MHZ, CMO |
4,735 |
|
Datasheet |
- | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
NK80530KZ800512MOBILE CELERON PROCESSOR |
1,897 |
|
- |
- | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
JM80547PG0961MIC MPU INTEL CELER 3.4GHZ 775LGA |
222 |
|
Datasheet |
775-BLGA | Intel® Celeron® | Bulk | Active | Intel® Celeron® Processor 550 | 1 Core, 64-Bit | 3.4GHz | - | - | - | - | - | - | - | 1.2V, 1.425V | 72.8°C (TC) | - | - | - | Surface Mount | 775-LGA (37.5x37.5) | - |
|
LS1028AXE7PQAIC MPU QORIQ 1.5GHZ 448FBGA |
4,362 |
|
- |
448-BFBGA | QorIQ® Layerscape | Tray | Active | ARM® Cortex®-A72 | 2 Core, 64-Bit | 1.5GHz | - | DDR3L, DDR4 | Yes | - | 1Gbps (1), 2.5Gbps (5) | SATA 6Gbps (1) | USB 3.0 (2) | - | -40°C ~ 105°C (TA) | - | - | Secure Boot, TrustZone® | Surface Mount | 448-FBGA (17x17) | CANbus, I2C, SPI, UART |
|
A80C188XL25IC MPU I186 25MHZ 68CPGA |
640 |
|
Datasheet |
68-BECPGA | i186 | Bag | Obsolete | 80C186 | 1 Core, 16-Bit | 25MHz | - | DRAM | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Through Hole | 68-CPGA | - |
|
|
MC8610VT800GBIC MPU MPC86XX 800MHZ 783FCPBGA |
2,123 |
|
Datasheet |
783-BBGA, FCBGA | MPC86xx | Box | Obsolete | PowerPC e600 | 1 Core, 32-Bit | 800MHz | - | DDR, DDR2 | No | DIU, LCD | - | - | - | 1.8V, 2.5V, 3.3V | 0°C ~ 105°C (TA) | - | - | - | Surface Mount | 783-FCPBGA (29x29) | AC97, DUART, HSSI, I2C, I2S, IrDA, PCI, SPI |
|
MC68LC040FE20AIC MPU M680X0 20MHZ 184CQFP |
912 |
|
Datasheet |
184-BCQFP | M680x0 | Bulk | Active | 68040 | 1 Core, 32-Bit | 20MHz | - | - | No | - | - | - | - | 5.0V | 0°C ~ 70°C (TA) | - | - | - | Surface Mount | 184-CQFP (31.3x31.3) | SCI, SPI |
|
HPIXP2325ABTWESTPORT NETWORK PROCESSOR |
785 |
|
- |
- | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MPC855TZQ80D4IC MPU MPC85XX 80MHZ 357BGA |
161 |
|
Datasheet |
357-BBGA | MPC85xx | Bulk | Active | MPC8xx | 1 Core, 32-Bit | 80MHz | Communications; CPM | DRAM | No | - | 10Mbps (1), 10/100Mbps (1) | - | - | 3.3V | 0°C ~ 95°C (TJ) | - | - | - | Surface Mount | 357-PBGA (25x25) | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
|
T1022NSE7PQBIC MPU QORIQ T1 1.4GHZ 780FCPBGA |
4,531 |
|
Datasheet |
780-FBGA, FCBGA | QorIQ T1 | Bulk | Active | PowerPC e5500 | 2 Core, 64-Bit | 1.4GHz | - | DDR3L/4 | No | - | 1Gbps (5) | SATA 3Gbps (2) | USB 2.0 + PHY (2) | - | 0°C ~ 105°C (TA) | - | - | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage | Surface Mount | 780-FCPBGA (23x23) | I2C, MMC/SD, PCIe, SPI, UART |
|
|
MPC8536EAVTAQGIC MPU MPC85XX 1.0GHZ 783FCPBGA |
1,498 |
|
Datasheet |
783-BBGA, FCBGA | MPC85xx | Bulk | Active | PowerPC e500 | 1 Core, 32-Bit | 1.0GHz | Security; SEC | DDR2, DDR3 | No | - | 10/100/1000Mbps (2) | SATA 3Gbps (2) | USB 2.0 (3) | 1.8V, 2.5V, 3.3V | 0°C ~ 90°C (TA) | - | - | Cryptography | Surface Mount | 783-FCPBGA (29x29) | DUART, I2C, MMC/SD, PCI, SPI |
|
MPC866TVR133AIC MPU MPC8XX 133MHZ 357BGA |
3,286 |
|
Datasheet |
357-BBGA | MPC8xx | Tray | Obsolete | MPC8xx | 1 Core, 32-Bit | 133MHz | Communications; CPM | DRAM | No | - | 10Mbps (4), 10/100Mbps (1) | - | - | 3.3V | 0°C ~ 95°C (TA) | - | - | - | Surface Mount | 357-PBGA (25x25) | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Microprocessors components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.