| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1368CS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
1,236 |
|
Datasheet |
LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 0.065V/µs | 160 kHz | - | 10 nA | 200 µV | 370µA (x2 Channels) | 75 mA | 1.8 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
AD622ANZIC INST AMP 1 CIRCUIT 8DIP |
541 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | - | 1 MHz | 2 nA | 60 µV | 900µA | 18 mA | 5.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT1167CN8#PBFIC INST AMP 1 CIRCUIT 8DIP |
528 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 80 pA | 20 µV | 900µA | - | 4.6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
AD8643ACPZ-REEL7IC OPAMP JFET 4 CIRCUIT 16LFCSP |
6,904 |
|
Datasheet |
- | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 3V/µs | 3.5 MHz | - | 0.25 pA | 70 µV | 200µA (x4 Channels) | 12 mA | 5 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-WQ (3x3) |
|
|
OPA4227UAIC OPAMP GP 4 CIRCUIT 14SOIC |
964 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 2.3V/µs | 8 MHz | - | 2.5 nA | 10 µV | 3.7mA (x4 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
ADA4077-2TRMZ-EPIC OPAMP GP 2 CIRCUIT 8MSOP |
1,490 |
|
Datasheet |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 2 | - | 1.2V/µs | 3.6 MHz | 5.5 MHz | 400 pA | 50 µV | 400µA (x2 Channels) | 10 mA | 5 V | 30 V | -55°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
ADA4932-1YCPZ-R2IC OPAMP DIFF 1 CIRCUIT 16LFCSP |
1,452 |
|
Datasheet |
- | 16-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Differential | 1 | Differential | 2800V/µs | - | 560 MHz | 2.5 µA | 500 µV | 9.6mA | 80 mA | 3 V | 11 V | -40°C ~ 105°C | - | - | Surface Mount | 16-LFCSP-VQ (3x3) |
|
LT1079IN#PBFIC OPAMP GP 4 CIRCUIT 14DIP |
1,074 |
|
Datasheet |
LT® | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | - | 0.1V/µs | 200 kHz | - | 6 nA | 70 µV | 38µA (x4 Channels) | - | 2.2 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LM6172IN/NOPBIC VOLTAGE FEEDBACK 2 CIRC 8DIP |
457 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 2 | - | 3000V/µs | 100 MHz | 160 MHz | 1.2 µA | 400 µV | 4.6mA (x2 Channels) | 90 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD8674ARUZ-REELIC OPAMP GP 4 CIRCUIT 14TSSOP |
3,575 |
|
Datasheet |
- | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 4V/µs | 10 MHz | - | 3 nA | 20 µV | 3mA (x4 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
LTC2052CS#PBFIC OPAMP ZERO-DRIFT 4 CIRC 14SO |
1,628 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Chopper (Zero-Drift) | 4 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x4 Channels) | - | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
AD8674ARZIC OPAMP GP 4 CIRCUIT 14SOIC |
1,499 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 4 | - | 4V/µs | 10 MHz | - | 3 nA | 20 µV | 3mA (x4 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LT1211IS8#PBFIC OPAMP GP 2 CIRCUIT 8SO |
1,113 |
|
Datasheet |
LT® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 7V/µs | 14 MHz | - | 50 nA | 150 µV | 1.8mA (x2 Channels) | 50 mA | 2.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
IVC102UIC SW INTEG 1 CIRCUIT 14SOIC |
723 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Switched Integrator | 1 | - | 3V/µs | 2 MHz | - | 0.1 pA | 500 µV | 4.1mA | 20 mA | 9.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA547F/500IC OPAMP GP 1 CIRC DDPAK/TO263-7 |
1,540 |
|
Datasheet |
- | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | Tape & Reel (TR) | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
OPA547TIC OPAMP GP 1 CIRCUIT TO220-7 |
557 |
|
Datasheet |
- | TO-220-7 Formed Leads | Tube | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 |
|
OPA547T-1IC OPAMP GP 1 CIRCUIT TO220-7 |
514 |
|
Datasheet |
- | TO-220-7 | Tube | Active | General Purpose | 1 | - | 6V/µs | 1 MHz | - | 100 nA | 1 mV | 10mA | 750 mA | 8 V | 60 V | -40°C ~ 85°C | - | - | Through Hole | TO-220-7 |
|
HCPL-7800-500EIC OPAMP ISOLATION 1 CIRC 8DIPGW |
2,317 |
|
Datasheet |
- | 8-SMD, Gull Wing | Tape & Reel (TR) | Active | Isolation | 1 | - | - | - | 100 kHz | 500 nA | 300 µV | 10.9mA | 16 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
HCPL-7800-300EIC OPAMP ISOLATION 1 CIRC 8DIPGW |
1,363 |
|
Datasheet |
- | 8-SMD, Gull Wing | Tube | Active | Isolation | 1 | - | - | - | 100 kHz | 500 nA | 300 µV | 10.9mA | 16 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DIP Gull Wing |
|
AD847JRZ-REEL7IC OPAMP GP 1 CIRCUIT 8SOIC |
2,094 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 300V/µs | 50 MHz | - | 3.3 µA | 500 µV | 5.3mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.