| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1008CHIC OPAMP GP 1 CIRCUIT TO5 |
3,584 |
|
Datasheet |
- | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | General Purpose | 1 | - | 0.2V/µs | - | - | 30 pA | 30 µV | 380µA | - | 4 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-5 |
|
OP285GSZ-REELIC OPAMP JFET 2 CIRCUIT 8SOIC |
2,828 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 22V/µs | 9 MHz | - | 100 nA | 35 µV | 4mA | - | 9 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8230YRZ-REELIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
2,388 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | - | - | 150 pA | 20 µV | 3.2mA | 15 mA | 8 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8556ARZ-REEL7IC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
2,457 |
|
Datasheet |
DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | - | 1.2V/µs | 2 MHz | - | 49 nA | 2 µV | 2mA | 10 mA | 4.5 V | 5.5 V | -40°C ~ 140°C | - | - | Surface Mount | 8-SOIC |
|
ADA4622-4ACPZ-RLIC OPAMP JFET 4 CIRCUIT 16LFCSP |
4,122 |
|
Datasheet |
- | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 23V/µs | 8 MHz | 15.5 MHz | 2 pA | 40 µV | 715µA (x4 Channels) | 20 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
INA145UAIC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,237 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | - | 0.45V/µs | - | 500 kHz | 50 nA | 200 µV | 570µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ACNT-H870-500EIC OPAMP ISOLATION 1 CIRC 8SO |
3,821 |
|
Datasheet |
- | 8-SOIC (0.535", 13.60mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | Differential | - | - | 100 kHz | 1.5 pA | 300 µV | 10.5mA | 30 mA | 3 V | 5.5 V | -40°C ~ 110°C (TA) | - | - | Surface Mount | 8-SO Stretched |
|
ALD2731SALIC CMOS 2 CIRCUIT 8SOIC |
1,393 |
|
- |
EPAD® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.7V/µs | 700 kHz | - | 0.01 pA | 1 mV | 240µA (x2 Channels) | 1 mA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
ALD2732SALIC OPAMP GP 2 CIRCUIT 8SOIC |
2,504 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.9V/µs | 1.5 MHz | - | 10 pA | 2 mV | - | - | 4 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
ALD1721ESALIC OPAMP GP 1 CIRCUIT 8SOIC |
3,341 |
|
Datasheet |
EPAD® | 8-SOIC (0.154", 3.90mm Width) | Tube | Not For New Designs | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.01 pA | 35 µV | 120µA | 1 mA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
ALD1722EPAIC OPAMP GP 1 CIRCUIT 8DIP |
4,192 |
|
Datasheet |
EPAD® | 8-DIP (0.300", 7.62mm) | Tube | Not For New Designs | General Purpose | 1 | Rail-to-Rail | 2.1V/µs | 1.7 MHz | - | 10 nA | 25 µV | 800µA | 8 mA | 4 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1793ACS8#TRPBFIC OPAMP JFET 1 CIRCUIT 8SO |
1,940 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 3.4V/µs | 4.2 MHz | - | 3 pA | 250 µV | 4.2mA | - | 9 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LMC6084AIMIC CMOS 4 CIRCUIT 14SOIC |
4,121 |
|
Datasheet |
LMC® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 2.2mA (x4 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
ALD1701BPALIC OPAMP GP 1 CIRCUIT 8DIP |
1,789 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 1 pA | 2 mV | 120µA | 1 mA | 2 V | 12 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX494EPDIC OPAMP GP 4 CIRCUIT 14DIP |
3,581 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 25 nA | 200 µV | 150µA (x4 Channels) | 30 mA | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LT6375HDF#TRPBFIC OPAMP DIFF 1 CIRCUIT 14DFN |
3,540 |
|
Datasheet |
- | 14-WFDFN Exposed Pad, 12 Leads | Tape & Reel (TR) | Active | Differential | 1 | Rail-to-Rail | 2.4V/µs | - | 575 kHz | - | 120 µV | 350µA | 28 mA | 3 V | 50 V | -40°C ~ 125°C | - | - | Surface Mount | 14-DFN (4x4) |
|
LMC6494AEMIC CMOS 4 CIRCUIT 14SOIC |
1,954 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.15 pA | 110 µV | 2.6mA (x4 Channels) | 30 mA | 2.5 V | 15.5 V | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 14-SOIC |
|
BUF634FIC BUFFER 1 CIRC DDPAK/TO263-5 |
2,154 |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tube | Obsolete | Buffer | 1 | - | 2000V/µs | - | 180 MHz | 5 µA | 30 mV | 15mA | 250 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
LT1817CS#PBFIC VOLTAGE FEEDBACK 4 CIRC 14SO |
3,909 |
|
Datasheet |
LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 4 | - | 1500V/µs | 220 MHz | 350 MHz | 2 µA | 200 µV | 6.5mA (x4 Channels) | 80 mA | 2.5 V | 11 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
ZXFBF08W20TCIC BUFFER OCTAL 100MHZ 20-SOIC |
4,082 |
|
Datasheet |
- | 20-SOIC (0.295", 7.50mm Width) | Cut Tape (CT) | Obsolete | Buffer | 8 | - | 40V/µs | - | 100 MHz | 500 nA | 15 mV | 15mA | 9 mA | - | - | 0°C ~ 70°C | - | - | Surface Mount | 20-SOIC |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.