| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
INA214BQDCKRTLPROTOTYPE |
3,398 |
|
- |
- | 6-TSSOP, SC-88, SOT-363 | Bulk | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | - | 30 kHz | 28 µA | 1 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C (TJ) | Automotive | AEC-Q100 | Surface Mount | SC-70-6 |
|
TLV2262AMUBLOW VOLTAGE RAIL-TO-RAIL LOW POW |
4,543 |
|
Datasheet |
LinCMOS™ | 10-CDFF | Tube | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.55V/µs | 710 kHz | - | 1 pA | 300 µV | 400µA | 50 mA | 2.7 V | 8 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 10-CFP |
|
LM6172AMJ-QMLDUAL HIGH SPEED, LOW POWER, LOW |
3,521 |
|
Datasheet |
- | 8-CDIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 2 | Single-Ended | 3000V/µs | 80 MHz | - | 4 µA | - | - | 60 mA | 5.5 V | 36 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
TLC2654AMJGBLOW NOISE CHOPPER-STABILIZED ADV |
2,978 |
|
Datasheet |
LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Tube | Active | Chopper (Zero-Drift) | 1 | Single-Ended | 3.7V/µs | 1.9 MHz | - | 50 pA | 4 µV | 1.5mA | 50 mA | 4.6 V | 16 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
TLV2262AMJGBLOW VOLTAGE RAIL-TO-RAIL LOW POW |
3,327 |
|
Datasheet |
LinCMOS™ | 8-CDIP (0.300", 7.62mm) | Tube | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.55V/µs | 710 kHz | - | 1 pA | 300 µV | 400µA | 50 mA | 2.7 V | 8 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
TL074QDREPAPROTOTYPE |
2,700 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 4 | Push-Pull | 13V/µs | 5.25 MHz | - | 65 pA | 3 mV | 1.4mA (x4 Channels) | 10 mA | 7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
OPA2228UE4DUAL, WIDE BANDWIDTH, HIGH PRECI |
2,520 |
|
- |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Single-Ended | 11V/µs | 33 MHz | - | 2.5 nA | 5 µV | 3.7mA (x2 Channels) | 45 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM6172AMGWRLQVDUAL HIGH-SPEED, LOW-POWER, LOW- |
3,501 |
|
Datasheet |
- | 16-CSOIC (0.241", 6.12mm Width) | Tray | Active | Voltage Feedback | 2 | Single-Ended | 3000V/µs | 80 MHz | - | 4 µA | - | - | 60 mA | 5.5 V | 36 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 16-CFP |
|
OPA2237UAE4DUAL SINGLE-SUPPLY OPERATIONAL A |
4,945 |
|
- |
MicroAmplifier™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Single-Ended | 0.5V/µs | 1.5 MHz | - | 10 nA | 250 µV | 170µA (x2 Channels) | 8 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
JM38510/11001SCASPACE-GRADE, QUAD, 44-V, 1-MHZ O |
1,222 |
|
Datasheet |
- | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | 0.2V/µs | 1 MHz | - | 100 nA | 5 mV | - | 55 mA | 10 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
LMP8480MM-S/NOPBPROTOTYPE |
2,276 |
|
- |
LMP® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Current Sense | 1 | - | 1V/µs | - | 270 kHz | 6.3 µA | 80 µV | 88µA | - | 4.5 V | 76 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
LM124AWRLQMLVSPACE-GRADE, QUAD, 32-V, 1-MHZ, |
2,713 |
|
Datasheet |
- | 14-CFlatPack | Tube | Active | General Purpose | 4 | Push-Pull | 0.1V/µs | 1 MHz | - | 100 pA | - | 1.5mA | 60 mA | 3 V | 32 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-CFP |
|
OP27AFKBLOW-NOISE PRECISION HIGH-SPEED O |
1,737 |
|
Datasheet |
- | 20-CLCC | Tube | Active | General Purpose | 1 | Push-Pull | 2.8V/µs | 8 MHz | - | 10 nA | 10 µV | - | 30 mA | 8 V | 44 V | -55°C ~ 125°C | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
LM124AJQUAD, 30-V, 1.2-MHZ, 3-MV OFFSET |
3,548 |
|
Datasheet |
- | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | 0.1V/µs | 1 MHz | - | 10 nA | - | 1.5mA | 20 mA | 3 V | 32 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
LT1013MJGBDUAL PRECISION OPERATIONAL AMPLI |
1,993 |
|
Datasheet |
- | 8-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 2 | Push-Pull | 0.4V/µs | 700 kHz | - | 15 nA | 60 µV | 350µA (x2 Channels) | 25 mA | 5 V | 30 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
THS4051MJGB70-MHZ HIGH-SPEED AMPLIFIER 8-CD |
2,386 |
|
Datasheet |
- | 8-CDIP (0.300", 7.62mm) | Tube | Active | Voltage Feedback | 1 | Push-Pull | 240V/µs | 70 MHz | 38 MHz | 2.5 µA | 2.5 mV | 8.5mA | 100 mA | 9 V | 32 V | -55°C ~ 125°C | - | - | Through Hole | 8-CDIP |
|
LMP2012WG-QMLVDUAL, HIGH PRECISION, RAIL-TO-RA |
4,951 |
|
- |
LMP® | 10-CSOIC (0.241", 6.12mm Width) | Tray | Active | General Purpose | 2 | Rail-to-Rail | 4V/µs | 3 MHz | - | 3 pA | 0.12 µV | 930µA (x2 Channels) | 17 mA | 2.7 V | 5 V | -55°C ~ 125°C | - | - | Surface Mount | 10-CFP |
|
LT1014AMJQUAD PRECISION OPERATIONAL AMPLI |
3,140 |
|
Datasheet |
- | 14-CDIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 700 kHz | - | 12 nA | 60 µV | 350µA (x4 Channels) | 25 mA | 4 V | 44 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
TLE2141IDRHEPROTOTYPE |
4,902 |
|
- |
Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | Push-Pull, Rail-to-Rail | 45V/µs | 5.9 MHz | - | 700 nA | 225 µV | 3.4mA | 50 mA | 4 V | 44 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LM2902KAVQDRCTPROTOTYPE |
2,093 |
|
- |
- | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Push-Pull | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.