| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MAX4202ESA+IC BUFFER 1 CIRCUIT 8SOIC |
1,913 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Buffer | 1 | - | 4200V/µs | - | 780 MHz | 800 nA | 1 mV | 2.2mA | 44 mA | 8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
M62580P#TF2JOPERATIONAL AMPLIFIER |
6,787 |
|
- |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
EL5235ISIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
5,334 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 475V/µs | 1.5 GHz | 650 MHz | 3.7 µA | 200 µV | 6.7mA (x2 Channels) | - | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLC274CDBRIC OPAMP GP 4 CIRCUIT 14SSOP |
2,824 |
|
Datasheet |
- | 14-SSOP (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SSOP |
|
AD8651ARM-REELIC OPAMP VF CMOS 50MHZ LN 8MSOP |
3,102 |
|
Datasheet |
DigiTrim® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 41V/µs | 50 MHz | - | 1 pA | 100 µV | 9.5mA | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
EL5234IYIC OPAMP VFB 2 CIRCUIT 10MSOP |
2,700 |
|
Datasheet |
- | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 475V/µs | 1.5 GHz | 650 MHz | 3.7 µA | 300 µV | 6.7mA | 140 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
MAX4202EUK+TIC BUFFER 1 CIRCUIT SOT23-5 |
1,760 |
|
Datasheet |
- | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Buffer | 1 | - | 4200V/µs | - | 780 MHz | 800 nA | 1 mV | 2.2mA | 44 mA | 8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC271BIS-13IC CMOS 1 CIRCUIT 8SO |
2,430 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 1 | - | 4.6V/µs | 2.2 MHz | - | 0.7 pA | 2 mV | 950µA | 30 mA | 4 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
ADA4891-3ARZ-RLIC CMOS 3 CIRCUIT 14SOIC |
2,063 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 3 | Rail-to-Rail | 210V/µs | 105 MHz | 220 MHz | 2 pA | 2.5 mV | 4.4mA (x3 Channels) | 125 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
ICL7622DCSDIC CMOS 2 CIRCUIT 14SOIC |
1,330 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA (x2 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
TL088CDIC OPAMP JFET 2 CIRCUIT 8SOIC |
850 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 2 | - | 18V/µs | 3 MHz | - | 30 pA | 100 µV | 2.6mA (x2 Channels) | 80 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA2244PAIC OPAMP GP 2 CIRCUIT 8DIP |
4,034 |
|
Datasheet |
MicroAmplifier™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.1V/µs | 430 kHz | - | 10 nA | 700 µV | 40µA (x2 Channels) | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMC6484AIN/NOPBLMC6484 ULTRA-LOW BIAS CURRENT, |
281 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.02 pA | 110 µV | 2.6mA (x4 Channels) | 30 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 14-PDIP |
|
OP07DPIC OPAMP GP 1 CIRCUIT 8DIP |
222 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.3V/µs | 600 kHz | - | 12 nA | 150 µV | - | - | 6 V | 36 V | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
TLC274CNSRIC OPAMP GP 4 CIRCUIT 14SO |
215 |
|
Datasheet |
- | 14-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 3.6V/µs | 2.2 MHz | - | 0.6 pA | 1.1 mV | 2.7mA (x4 Channels) | 30 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
AD8619ARZ-REELIC CMOS 4 CIRCUIT 14SOIC |
4,983 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Rail-to-Rail | 0.1V/µs | 400 kHz | - | 0.2 pA | 400 µV | 38µA | 80 mA | 1.8 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
|
LTC6084HDD#TRPBFIC CMOS 2 CIRCUIT 10DFN |
3,813 |
|
Datasheet |
- | 10-WFDFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.5V/µs | 1.5 MHz | - | 1 pA | 300 µV | 110µA (x2 Channels) | 12.5 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 10-DFN (3x3) |
|
OP250GSIC CMOS 2 CIRCUIT 8SOIC |
189,120 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 6.5V/µs | 4 MHz | - | 30 pA | 5 mV | 550µA (x2 Channels) | 250 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
MAX4286EUT-TIC BUFFER 1 CIRCUIT SOT6 |
3,115 |
|
Datasheet |
- | SOT-23-6 | Tape & Reel (TR) | Obsolete | Buffer | 1 | - | 385V/µs | - | 130 MHz | 13 µA | 1.5 mV | 23mA | 106 mA | 2.85 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-6 |
|
EL5364IUZA-T7S2490SIC OPAMP CFA 3 CIRCUIT 16QSOP |
11,780 |
|
Datasheet |
EL5364 | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | Push-Pull | 4200V/µs | - | 600 MHz | 2 µA | 1.5 mV | 3.5mA (x3 Channels) | 140 mA | 5 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QSOP |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.