| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CA30003HIGH RELIABILITY DC AMPLIFIER |
929 |
|
Datasheet |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
TL051MLBIC OPAMP JFET 1 CIRCUIT TO99-8 |
836 |
|
Datasheet |
LinCMOS™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Through Hole | TO-99-8 |
|
AD705AZIC OPAMP GP 1 CIRCUIT 8CERDIP |
674 |
|
Datasheet |
- | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.15V/µs | - | - | 10 pA | 5 µV | 380µA | 15 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
LT1672CS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
190 |
|
Datasheet |
Over-The-Top® | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
AD8682ARZ-REEL7IC OPAMP JFET 2 CIRCUIT 8SOIC |
4,806 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 2 | - | 9V/µs | 3.5 MHz | - | 6 pA | 350 µV | 210µA (x2 Channels) | 12 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
ADA4528-2TCPZ-EPR7IC OPAMP ZERO-DRIFT 2CIRC 8LFCSP |
3,965 |
|
Datasheet |
- | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Zero-Drift | 2 | Rail-to-Rail | 0.5V/µs | 3.4 MHz | 6.5 MHz | 125 pA | 0.3 µV | 1.5mA (x2 Channels) | 40 mA | 2.2 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-LFCSP-WD (3x3) |
|
AD8369ARUIC AMP VGA 16TSSOP |
3,884 |
|
Datasheet |
X-AMP® | 16-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Variable Gain | 1 | - | 1200V/µs | - | 600 MHz | 160 µA | - | 37mA | - | 3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-TSSOP |
|
TLC4502CDIC CMOS 2 CIRCUIT 8SOIC |
117 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 2.5mA (x2 Channels) | 50 mA | 4 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA4228PAOPA4228 QUAD HIGH PRECISION, WID |
998 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 11V/µs | 33 MHz | - | 2.5 nA | 10 µV | 3.7mA (x4 Channels) | 45 mA | 5 V | 36 V | -55°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
OP495GS-REELIC OPAMP GP 4 CIRCUIT 16SOIC |
4,408 |
|
Datasheet |
- | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.03V/µs | 75 kHz | - | 7 nA | 300 µV | - | 25 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 16-SOIC |
|
MAX435ESD+IC OPAMP TRANSCOND 1 CIRC 14SOIC |
922 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Transconductance | 1 | Differential | 800V/µs | - | 275 MHz | 1 µA | 300 µV | 35mA | 10 mA | 9.5 V | 10.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX421CPD+IC OPAMP ZER-DRIFT 1CIRC 14DIP |
1,143 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | - | 5 V | 33 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LT1674IS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
322 |
|
Datasheet |
LT® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA (x4 Channels) | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
UA747MWBIC OPAMP GP 2 CIRCUIT 14CFP |
147 |
|
Datasheet |
- | 14-CFlatPack | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | - | - | 80 nA | 1 mV | 1.7mA (x2 Channels) | 25 mA | 7 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 14-CFP |
|
EL8203ISIC OPAMP GP 2 CIRCUIT 8SOIC |
17,552 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA (x2 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LTC6256HTS8#TRPBFIC OPAMP GP 2 CIRCUIT TSOT23-8 |
3,492 |
|
Datasheet |
- | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 1.8V/µs | 6.5 MHz | 4.5 MHz | 5 nA | 100 µV | 65µA (x2 Channels) | 35 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-8 |
|
ICL7652CWE+IC OPAMP ZERO-DRIFT 1CIRC 16SOIC |
1,031 |
|
Datasheet |
- | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Zero-Drift | 1 | - | 0.5V/µs | 450 kHz | - | 15 pA | 700 µV | 2mA | - | 5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
AD8555ACP-R2IC AMP CHOPPER 2MHZ 10MA 16LFCSP |
4,750 |
|
Datasheet |
DigiTrim® | 16-VQFN Exposed Pad, CSP | Bulk | Obsolete | Chopper (Zero-Drift) | 1 | - | 1.2V/µs | 2 MHz | - | 16 nA | 2 µV | 2mA | 10 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-VQ (4x4) |
|
ADA4627-1ACPZ-R2IC OPAMP JFET 1 CIRCUIT 8LFCSP |
1,679 |
|
Datasheet |
- | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 1 | - | 84V/µs | 19 MHz | - | 1 pA | 120 µV | 7mA | 45 mA | 10 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
TLC1079INIC CMOS 4 CIRCUIT 14DIP |
4,302 |
|
Datasheet |
LinCMOS™ | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 4 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x4 Channels) | 30 mA | 3 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.