| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6259HMS#PBFIC OPAMP GP 2 CIRCUIT 10MSOP |
380 |
|
Datasheet |
- | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 0.24V/µs | 1.3 MHz | - | 5 nA | 100 µV | 20µA (x2 Channels) | 10 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
LTC6262HMS#PBFIC OPAMP GP 2 CIRCUIT 10MSOP |
310 |
|
Datasheet |
- | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 7V/µs | 30 MHz | - | 10 nA | 50 µV | 245µA (x2 Channels) | 40 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
LT6200IS6-5#TRPBFIC BUFFER 1 CIRCUIT TSOT23-6 |
1,027 |
|
Datasheet |
- | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | Buffer | 1 | Rail-to-Rail | 250V/µs | 800 MHz | - | 23 µA | 2.5 mV | 20mA | 90 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-6 |
|
AD8330ACP-R2IC AMP VGA 150MHZ LN LP 16LFCSP |
5,521 |
|
Datasheet |
- | 16-WFQFN Exposed Pad, CSP | Bulk | Obsolete | Variable Gain | 1 | Differential, Rail-to-Rail | 1500V/µs | - | 150 MHz | 100 nA | - | 20mA | - | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP-WQ (3x3) |
|
OP213EZIC OPAMP GP 2 CIRCUIT 8CERDIP |
1,765 |
|
Datasheet |
- | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 1.2V/µs | 3.4 MHz | - | 240 nA | 100 µV | - | 40 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD842JNIC OPAMP GP 80MHZ 100MA 14DIP |
4,779 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 375V/µs | 80 MHz | - | 4.2 µA | 500 µV | 13mA | 100 mA | 10 V | 36 V | 0°C ~ 75°C | - | - | Through Hole | 14-PDIP |
|
ACPL-785J-500EIC OPAMP ISOLATION 1 CIRC 16SO |
1,700 |
|
Datasheet |
- | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | - | - | - | 30 kHz | 350 nA | 3 mV | 10.7mA | 20 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
ICL7622BCPD+IC OPAMP GP 2 CIRCUIT 14DIP |
2,877 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 5 mV | 1mA (x2 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
OPA3S328RGRRIC CMOS 2 CIRCUIT 20VQFN |
1,848 |
|
Datasheet |
- | 20-VFQFN Exposed Pad | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 30V/µs | 40 MHz | - | 0.2 pA | 10 µV | 3.8mA (x2 Channels) | 63 mA | 2.2 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 20-VQFN (3.5x3.5) |
|
LT1220CS8LT1220 - OP AMP GENERAL PURPOSE |
3,707 |
|
Datasheet |
LT1220 | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | - | 250V/µs | 45 MHz | - | 100 nA | 500 µV | 8mA | 26 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
|
THS4509RGTRIC OPAMP DIFF 1 CIRCUIT 16VQFN |
727 |
|
Datasheet |
- | 16-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 6600V/µs | 3 GHz | 2 GHz | 8 µA | 1 mV | 37.7mA | - | 3 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (3x3) |
|
AD518JHIC OPAMP GP 1 CIRCUIT TO99 |
3,276 |
|
Datasheet |
- | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 70V/µs | 12 MHz | - | 120 nA | 2 mV | 5µA | 10 mA | - | - | -55°C ~ 125°C | - | - | Through Hole | TO-99 |
|
MAX417CPA+IC OPAMP GP 2 CIRCUIT 8DIP |
2,308 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.08V/µs | 150 kHz | - | 0.1 pA | 1 mV | 1µA (x2 Channels) | 600 µA | 2.5 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
HCPL-788J#500IC OPAMP ISOLATION 1 CIRC 16SO |
1,907 |
|
Datasheet |
- | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Isolation | 1 | - | - | - | 30 kHz | - | 3 mV | 20mA | 20 mA | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
OPA4131PAIC OPAMP JFET 4 CIRCUIT 14DIP |
14,276 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 10V/µs | 4 MHz | - | 5 pA | 200 µV | 1.5mA (x4 Channels) | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
THS4042IDGNIC OPAMP VFB 2 CIRCUIT 8HVSSOP |
1,611 |
|
Datasheet |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 2 | - | 400V/µs | - | 165 MHz | 2.5 µA | 2.5 mV | 8mA (x2 Channels) | 100 mA | 9 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
HA7-5137-2IC OPAMP GP 1 CIRCUIT 8CERDIP |
141 |
|
Datasheet |
- | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 20V/µs | 80 MHz | - | 15 nA | 30 µV | 3.5mA | 25 mA | 44 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
AD841KNIC OPAMP GP 40MHZ 50MA 14DIP |
2,110 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 40 MHz | - | 3.5 µA | 500 µV | 11mA | 50 mA | 10 V | 36 V | 0°C ~ 75°C | - | - | Through Hole | 14-PDIP |
|
|
LMC6084IM/NOPBIC CMOS 4 CIRCUIT 14SOIC |
410 |
|
Datasheet |
LMC® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 2.2mA (x4 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OPA653IDRBTIC OPAMP JFET 1 CIRCUIT 8SON |
1,337 |
|
Datasheet |
- | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | J-FET | 1 | - | 2675V/µs | - | 500 MHz | 10 pA | 1 mV | 32mA | 70 mA | 7 V | 13 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.