| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM224NIC OPAMP GP 4 CIRCUIT 14DIP |
4,137 |
|
Datasheet |
- | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.4V/µs | 1.3 MHz | - | 20 nA | 2 mV | 1.5mA | 40 mA | 3 V | 30 V | -40°C ~ 105°C | - | - | Through Hole | 14-DIP |
|
UA741MDIC OPAMP GP 1 CIRCUIT 8SOIC |
3,054 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 10 nA | 1 mV | 1.7mA | 25 mA | 10 V | 44 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LM358AMIC OPAMP GP 2 CIRCUIT 8SOIC |
1,863 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | - | - | - | 45 nA | 2 mV | 1.5mA | 30 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TL062CDRG4IC OPAMP JFET 2 CIRCUIT 8SOIC |
3,151 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 2 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x2 Channels) | 20 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LM2902AT14-13IC OPAMP GP 4 CIRCUIT 14TSSOP |
1,165 |
|
Datasheet |
- | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.3V/µs | 700 kHz | - | 20 nA | 1 mV | 700µA (x4 Channels) | 40 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LM324WPTLINEAR IC'S |
3,375 |
|
- |
- | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | Push-Pull | 0.4V/µs | 1.3 MHz | - | 20 nA | 2 mV | 1.5mA | 40 mA | 3 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-TSSOP |
|
LM358ADRE4IC OPAMP GP 2 CIRCUIT 8SOIC |
4,378 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 15 nA | 2 mV | 500µA (x2 Channels) | 40 mA | 3 V | 30 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
NJM4558CV-TE1IC OPAMP GP 2 CIRCUIT 8SSOP |
2,767 |
|
Datasheet |
- | 8-LSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 1.5V/µs | 3.5 MHz | - | 25 nA | 500 µV | 3.5mA | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SSOP |
|
|
LM224ADRE4IC OPAMP GP 4 CIRCUIT 14SOIC |
3,703 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 15 nA | 2 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LM2902AS14-13IC OPAMP GP 4 CIRCUIT 14SO |
1,212 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 0.3V/µs | 700 kHz | - | 20 nA | 1 mV | 700µA (x4 Channels) | 40 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
|
AS358GTR-G1IC OPAMP GP 2 CIRCUIT 8TSSOP |
1,951 |
|
Datasheet |
- | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | - | - | - | 20 nA | 2 mV | 700µA (x2 Channels) | 40 mA | 3 V | 36 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
TL072CNIC OPAMP JFET 2 CIRC 8MINI DIP |
1,121 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 16V/µs | 4 MHz | - | 20 pA | 3 mV | 1.4mA | 40 mA | 6 V | 36 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
RC4580IDGKROP AMP |
2,754 |
|
- |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Push-Pull | 5V/µs | 12 MHz | - | 100 nA | 500 µV | 3mA (x2 Channels) | 50 mA | 4 V | 32 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
AP4310AUMTR-E1IC OPAMP GP 2 CIRCUIT 8SO |
1,405 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.5V/µs | 1 MHz | - | 20 nA | 500 µV | 150µA (x2 Channels) | 40 mA | 3 V | 36 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-SO |
|
NJM2904CM-TE2IC OPAMP GP 2 CIRCUIT 8DMP |
1,766 |
|
Datasheet |
- | 8-SOIC (0.197", 5.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 0.6V/µs | 1.1 MHz | - | 20 nA | 500 µV | 700µA | 40 mA | 3 V | 32 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DMP |
|
RC4558PG4IC OPAMP GP 2 CIRCUIT 8DIP |
3,616 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Differential | 1.7V/µs | 3 MHz | - | 150 nA | 500 µV | 2.5mA (x2 Channels) | 10 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM2902KNSIC OPAMP GP 4 CIRCUIT 14SO |
3,783 |
|
Datasheet |
- | 14-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SO |
|
LM2902KNSE4IC OPAMP GP 4 CIRCUIT 14SO |
3,068 |
|
Datasheet |
- | 14-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SO |
|
LM2902KNSG4IC OPAMP GP 4 CIRCUIT 14SO |
2,990 |
|
Datasheet |
- | 14-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-SO |
|
LM258ADRE4IC OPAMP GP 2 CIRCUIT 8SOIC |
4,746 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 15 nA | 2 mV | 500µA (x2 Channels) | 40 mA | 3 V | 32 V | -25°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.