| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Output Type | Function | Output Configuration | Topology | Number of Outputs | Output Phases | Voltage - Supply (Vcc/Vdd) | Frequency - Switching | Duty Cycle (Max) | Synchronous Rectifier | Clock Sync | Serial Interfaces | Control Features | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MB4243PFV-GT-BNDE1IC POWER MANAGEMENT 48LQFP |
2,361 |
|
- |
* | - | Tray | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MB40C368PFV-G-BNDE1IC REG DC/DC CONV 24SSOP |
4,829 |
|
- |
* | - | Tube | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MB44C005BBGL-G-ERE1IC POWER MANAGEMENT 148BGA |
4,062 |
|
- |
* | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MB596PMC-GE1IC REGULATOR 64LQFP |
4,826 |
|
- |
* | - | Tray | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
ISL6522CBZ-TR5190CIC REG CTRLR BUCK 14SOIC |
2,941 |
|
- |
- | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Transistor Driver | Step-Down | Positive | Buck | 1 | 1 | 10.8V ~ 13.2V | 200kHz | 100% | Yes | No | - | Enable, Frequency Control, Phase Control, Soft Start | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SOIC |
|
NCP81216MNTXGIC SWITCHING CONTROLLER QFN |
3,230 |
|
- |
- | 52-VFQFN Exposed Pad | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 52-QFN (6x6) |
|
NCP81218FMNTXGIC SWITCHING CONTROLLER QFN |
2,328 |
|
- |
- | 48-VFQFN Exposed Pad | Tape & Reel (TR) | Active | PWM | - | - | - | 3 | 2 | - | - | - | No | No | - | - | - | - | - | Surface Mount | 48-QFN (6x6) |
|
NCV891334MW33R2GIC REG CTRLR BUCK 12DFN |
4,950 |
|
Datasheet |
- | 12-VDFN Exposed Pad | Tape & Reel (TR) | Obsolete | PWM Signal | Step-Down | Positive | Buck | 1 | 1 | 3.7V ~ 36V | 2MHz | 60% | - | Yes | - | Current Limit, Enable, Reset | -40°C ~ 150°C (TJ) | Automotive | - | Surface Mount | 12-DFN (4x4) |
|
TPS40200HDRTPS40200HDR |
4,766 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Transistor Driver | Step-Down | Positive | Buck | 1 | 1 | 5.5V ~ 52V | 35kHz ~ 500kHz | 98% | No | No | - | Frequency Control, Soft Start | -55°C ~ 175°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MP2908AGL-ZIC REG BUCK ADJUSTABLE |
3,981 |
|
Datasheet |
- | 20-TFQFN Exposed Pad | Tape & Reel (TR) | Active | Adjustable | Step-Down | Positive | Buck | 1 | - | 4V ~ 60V | 1MHz | 99.5% | Yes | Yes | - | Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 20-QFN (3x4) |
|
MP2908AGL-PIC REG BUCK ADJUSTABLE |
4,606 |
|
Datasheet |
- | 20-TFQFN Exposed Pad | Tape & Reel (TR) | Active | Adjustable | Step-Down | Positive | Buck | 1 | - | 4V ~ 60V | 1MHz | 99.5% | Yes | Yes | - | Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 20-QFN (3x4) |
|
MP2918GF4V-40V INPUT, CURRENT MODE SYNCH |
2,088 |
|
Datasheet |
- | 20-TSSOP (0.173", 4.40mm Width) Exposed Pad | Tube | Active | PWM Signal | Step-Down | Positive | Buck | 1 | 1 | 4V ~ 40V | 100kHz ~ 1MHz | 99.5% | Yes | Yes | - | Enable, Frequency Control, Power Good, Soft Start | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 20-TSSOP-EP |
|
MP9928GF4V-60V INPUT, CURRENT MODE, SYNC |
3,625 |
|
Datasheet |
- | 20-TSSOP (0.173", 4.40mm Width) Exposed Pad | Tube | Active | Transistor Driver | Step-Down | Positive | Buck | 1 | 1 | 4V ~ 60V | 100kHz ~ 1MHz | 99.5% | Yes | Yes | - | Enable, Phase Control, Power Good, Soft Start | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 20-TSSOP-EP |
|
MP2908AGFIC REG BUCK ADJUSTABLE 20TSSOP |
2,858 |
|
Datasheet |
- | 20-TSSOP (0.173", 4.40mm Width) Exposed Pad | Tube | Active | Adjustable | Step-Down | Positive | Buck | 1 | - | 4V ~ 60V | 1MHz | 99.5% | Yes | Yes | - | Current Limit, Enable, Frequency Control, Phase Control, Power Good, Soft Start | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 20-TSSOP-EP |
|
MP3910AGSPEAK CURRENT MODE BOOST PWM CONT |
2,419 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | PWM Signal | Step-Up | Positive | Boost | 1 | 1 | 9V ~ 14V | 30kHz ~ 400kHz | 95% | No | No | - | Current Limit, Frequency Control, Soft Start | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
S6AP111A28GT11000ANALOG |
2,519 |
|
- |
- | 24-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Transistor Driver | Step-Down | Positive | Boost | 2 | 1 | 6V ~ 28V | - | - | Yes | No | - | Current Limit, Soft Start | -40°C ~ 85°C (TA) | - | - | Surface Mount | 24-TSSOP |
|
TS34063CD C3GSWITCHING REGULATOR, DC-DC, BUCK |
4,341 |
|
- |
- | 8-DIP (0.309", 7.87mm) | Tube | Active | Transistor Driver | Step-Up, Step-Down | Positive | Buck, Boost | 1 | 1 | 3V ~ 40V | 33kHz | - | No | No | - | - | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-DIP |
|
MIC2127-AYML75V, SYNCHRONOUS BUCK CONTROLLER |
1,148 |
|
Datasheet |
Hyper Speed Control® | 16-VFQFN Exposed Pad | Tube | Active | Transistor Driver | Step-Down | Positive | Buck | 1 | 1 | 4.5V ~ 75V | 200kHz ~ 800kHz | 85% | Yes | No | - | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 16-QFN (3x3) |
|
MAX1524EUT+IC REG CTRLR MULT TOP SOT23-6 |
3,718 |
|
- |
- | SOT-23-6 | Tray | Obsolete | Transistor Driver | Step-Down, Step-Up/Step-Down | Positive | Boost, Flyback, SEPIC | 1 | 1 | 2.5V ~ 5.5V | - | 85% | No | No | - | Enable | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-6 |
|
MAX20754ETM10+IC MULTIPHASE DC-DC CTLR TQFN |
2,144 |
|
- |
- | 48-WFQFN Exposed Pad | Tray | Obsolete | PWM | Step-Down | Positive | Buck | 2 | 6 | 4.5V ~ 16V | 300kHz ~ 800kHz | - | No | No | PMBus | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 48-TQFN (7x7) |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing DC DC Switching Controllers components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.