| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MP5090GQHT-PIC PWR HI-EFF DL P-CH 1:1 8TQFN |
388 |
|
Datasheet |
8-WFDFN | - | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | High Side | P-Channel | On/Off | 0.5V ~ 5.5V | 0.5V ~ 5.5V | 3A | 20mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Short-Circuit, Thermal Shutdown, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-TQFN (1.5x2) |
|
BD2247G-GTRIC PWR SWITCH N-CHAN 1:1 5SSOP |
2,998 |
|
Datasheet |
SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 630mA | 110mOhm | Non-Inverting | Load Discharge, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 5-SSOP |
|
BD2246G-GTRIC PWR SWITCH N-CHAN 1:1 5SSOP |
2,799 |
|
Datasheet |
SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 630mA | 110mOhm | Non-Inverting | Load Discharge, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 5-SSOP |
|
MP5094GJ-ZDUAL-CHANNEL 12V/5V CURRENT-LIMI |
2,385 |
|
Datasheet |
SOT-23-8 Thin, TSOT-23-8 | - | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | - | - | - | 4.6V ~ 5.5V, 10.2V ~ 14.5V | Not Required | 8A, 8A | 50mOhm, 30mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | TSOT-23-8 |
|
EPC2121IC BIDIRECT SW 100V .045OHM 4BGA |
4,950 |
|
Datasheet |
- | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MP5010ADQ-LF-ZIC PWR SWITCH N-CHAN 1:1 10QFN |
5,000 |
|
Datasheet |
10-VFDFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 3V ~ 18V | Not Required | 5A | 40mOhm | - | Slew Rate Controlled, Status Flag | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 10-QFN (3x3) |
|
AP2172SG-13IC PWR SWITCH P-CHANNEL 1:2 8SOP |
2,500 |
|
Datasheet |
8-SOIC (0.154", 3.90mm Width) | - | Tape & Reel (TR) | Active | USB Switch | 2 | 1:2 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 1A | 120mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOP |
|
AOZ13937DI-0232V IDEAL DIODE SINK SWITCH LATC |
4,824 |
|
Datasheet |
12-VFDFN Exposed Pad | ECPower™ | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 3.4V ~ 32V | Not Required | 7A | 20mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled, Status Flag | Current Limiting (Adjustable), Over Temperature, Over Voltage, Reverse Current, Short Circuit, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 12-DFN (3x3) |
|
|
TPS2541ARTETIC PWR SWITCH N-CHAN 1:1 16WQFN |
1,033 |
|
Datasheet |
16-WFQFN Exposed Pad | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 5.5V | Not Required | 2.5A | 73mOhm | Non-Inverting | Load Discharge, Status Flag | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 16-WQFN (3x3) |
|
|
TPS2540ARTETIC PWR SWITCH N-CHAN 1:1 16WQFN |
462 |
|
Datasheet |
16-WFQFN Exposed Pad | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 5.5V | Not Required | 2.5A | 73mOhm | Non-Inverting | Status Flag | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 16-WQFN (3x3) |
|
KTS1697AEOAB-TR7ARMS VBUS CURRENT-SINK PROTECTI |
442 |
|
Datasheet |
25-WFBGA, WLCSP | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | - | On/Off | 3V ~ 23V | Not Required | 7A | 11mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage, Reverse Current, Short Circuit | -40°C ~ 85°C | - | - | Surface Mount | 25-WLCSP (2.7x2.7) |
|
TPS2555DRCTIC PWR SWITCH N-CHAN 1:1 10VSON |
320 |
|
Datasheet |
10-VFDFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 5.5V | Not Required | 2.5A | 73mOhm | - | Status Flag | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 10-VSON (3x3) |
|
TCK322G,LFIC PWR SWITCH N-CHAN 2:1 16WCSP |
4,039 |
|
Datasheet |
16-UFBGA, CSPBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 2:1 | High Side | N-Channel | On/Off | 2.3V ~ 36V | Not Required | 2A | 98mOhm | - | Slew Rate Controlled, Status Flag | Over Temperature, Over Voltage, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-WCSPC (1.9x1.9) |
|
TBD62502AFG,ELIC PWR SWITCH N-CHAN 1:1 16SOP |
1,652 |
|
Datasheet |
16-SOIC (0.173", 4.40mm Width) | - | Tape & Reel (TR) | Active | General Purpose | 7 | 1:1 | Low Side | N-Channel | On/Off | 50V (Max) | Not Required | 300mA | - | Inverting | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOP |
|
RT9728BLGQWIC PWR SWITCH P-CHAN 1:1 6WDFN |
2,400 |
|
Datasheet |
6-WDFN Exposed Pad | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | P-Channel | On/Off | 2.5V ~ 5.5V | Not Required | 1.8A | 120mOhm | Non-Inverting | - | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 6-WDFN (2x2) |
|
|
TBD62089APGIC PWR DRIVER N-CHAN 1:1 20DIP |
798 |
|
Datasheet |
20-DIP (0.300", 7.62mm) | - | Tray | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | -40°C ~ 85°C (TA) | - | - | Through Hole | 20-DIP |
|
AP2196SG-13IC PWR SWITCH P-CHANNEL 1:2 8SOP |
6,678 |
|
Datasheet |
8-SOIC (0.154", 3.90mm Width) | - | Tape & Reel (TR) | Active | USB Switch | 2 | 1:2 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 1.5A | 100mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOP |
|
AP2192MPG-13IC PWR SWITCH 2CH USB 1.5A 8MSOP |
2,470 |
|
Datasheet |
8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | USB Switch | 2 | 1:2 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 1.5A | 85mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP-EP |
|
AP2172MPG-13IC PWR SWITCH P-CHAN 1:2 8MSOP |
2,343 |
|
Datasheet |
8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | USB Switch | 2 | 1:2 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 1A | 115mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP-EP |
|
AP2142MPG-13IC PWR SWITCH P-CHAN 1:2 8MSOP |
1,683 |
|
Datasheet |
8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | USB Switch | 2 | 1:2 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 500mA | 115mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP-EP |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Power Distribution Switches, Load Drivers components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.