| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC22XSD200BEK-NXPHIGH-SIDE SWITCH, 36V, DUAL 22MO |
4,499 |
|
Datasheet |
- | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MC10XS6325EKIC PWR SWITCH HIGH SIDE 32HSOP |
3,913 |
|
Datasheet |
32-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tube | Obsolete | General Purpose | 3 | - | High Side | - | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 3.8A, 9A | 10mOhm, 25mOhm | - | Status Flag | Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 32-HSOP |
|
DG125BP5 CHANNEL DRIVER SWICH |
1,002 |
|
Datasheet |
14-DIP (0.300", 7.62mm) | - | Bulk | Active | General Purpose | 5 | 1:1 | - | P-Channel | On/Off | 33V | Not Required | - | 100Ohm | Inverting, Non-Inverting | - | - | -20°C ~ 85°C | - | - | Through Hole | 14-CERDIP |
|
16SCT100-T5HIGH SIDE SWITCH 1200V 15A |
2,375 |
|
Datasheet |
- | - | Tray | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 40V ~ 1200V | Not Required | 15A | 210mOhm | Non-Inverting | - | - | -40°C ~ 150°C (TJ) | - | - | Surface Mount | TO-263HV |
|
|
DRF1211RF MOSFET (VDMOS) DRIVER 500V 60 |
2,679 |
|
Datasheet |
Module | - | Bulk | Active | General Purpose | 1 | - | - | - | - | - | 15V | - | - | - | - | - | - | - | - | Chassis Mount | T2B |
|
TPS7H2201Y/EMRADIATION-HARDENED QMLV, 1.5-V T |
4,220 |
|
Datasheet |
Die | - | Tube | Discontinued at Digi-Key | General Purpose | 1 | 1:1 | - | P-Channel | - | 1.5V ~ 7V | Not Required | 6A | 35mOhm | Non-Inverting | - | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO | -55°C ~ 125°C | - | - | Surface Mount | Die |
|
GLF1220HNano-Current Consumed Power Swit |
500 |
|
Datasheet |
4-XFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.5V ~ 5.5V | Not Required | 1A | 52mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Reverse Current | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.67x0.67) |
|
GLF1221HNano-Current Consumed Power Swit |
500 |
|
Datasheet |
4-XFBGA, WLCSP | IQSmart™ | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.5V ~ 5.5V | Not Required | 1A | 52mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Reverse Current | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.67x0.67) |
|
GLF725112A ULTRA LOW CURRENT N-CH ROAD S |
500 |
|
Datasheet |
4-UFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | High Side | P-Channel | - | - | 0.8V ~ 3.6V | 2A | 27mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.97x0.97) |
|
FPF2187IC BUFFER/INVERTER |
750 |
|
Datasheet |
- | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GLF823212A TRCB NANO POWER LOAD SWITCH |
500 |
|
Datasheet |
SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | - | - | 2V ~ 6.5V | Not Required | 2A | 40mOhm | - | Load Discharge, Slew Rate Controlled | Reverse Current | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
GLF1110QAutomotive Nano Current Power IQ |
500 |
|
Datasheet |
- | * | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GLF1201QAutomotive Nano Current Power IQ |
500 |
|
Datasheet |
- | * | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GLF40002A, Ultra-Low IQ Power Mux with |
100 |
|
Datasheet |
- | - | Retail Package | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GLF76121S2A NANO CURRENT CONSUMED POWER R |
500 |
|
Datasheet |
6-UFBGA, WLCSP | IQSmart™ | Bulk | Active | Load Switch | - | - | - | P-Channel | - | - | 2.5V ~ 5.5V | 2A | 34mOhm | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (1.47x0.97) |
|
GLF713234A, Low RON IQSmartTM Power Load |
100 |
|
Datasheet |
- | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GLF713224A, Low RON IQSmartTM Power Load |
100 |
|
Datasheet |
- | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
GLF745212.5A, Ultra-Low IQ Power Mux wit |
100 |
|
Datasheet |
6-UFBGA, WLCSP | IQSmart™ | Retail Package | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | - | 1.5V ~ 5.5V | 2.5A | 35mOhm | Non-Inverting | Slew Rate Controlled | Reverse Current | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-WLCSP (0.97x1.47) |
|
GLF2313B-T1G72A Active Low Current Limit Powe |
1,000 |
|
Datasheet |
SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 2.5V ~ 5.5V | Not Required | 2A | 56mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled, Status Flag | Current Limiting (Adjustable), Over Temperature, Reverse Current, Short Circuit, UVLO | -40°C ~ 105°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
GLF2311B-T1G72.1A CURRENT LIMIT POWER SWITCH |
500 |
|
Datasheet |
SC-74A, SOT-753 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | - | On/Off | 2.5V ~ 5.5V | Not Required | 2.1A | 56mOhm | - | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Over Temperature, Reverse Current, Short Circuit, UVLO | - | - | - | Surface Mount | SOT-23-5 |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Power Distribution Switches, Load Drivers components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.