| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
BTS740S2XUMA1IC PWR SWITCH N-CHAN 1:1 DSO-20 |
7,726 |
|
Datasheet |
20-SOIC (0.295", 7.50mm Width) | PROFET® | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 5V ~ 34V | Not Required | 4.9A | 27mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-DSO-20 |
|
ISO8200AQTRIC PWR DRIVER 1:1 32TFQFPN |
2,751 |
|
Datasheet |
32-TQFN Exposed Pad | - | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 8 | 1:1 | High Side | - | SPI | 10.5V ~ 36V | 2.75V ~ 5.5V | 700mA | 120mOhm | - | Auto Restart, Galvanic Isolation, Status Flag | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 32-TFQFPN (11x9) |
|
BTS500101TAEATMA1IC PWR HIC-PROFET N-CH 1:1 TO263 |
3,677 |
|
Datasheet |
TO-263-7, D2PAK (6 Leads + Tab), TO-263CB | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 8V ~ 18V | Not Required | 48A | 1.6mOhm | Non-Inverting | - | Over Temperature, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | P/PG-TO-263-7-10 |
|
L9822EPD013TRIC PWR DRIVER 1:8 PWRSO20 |
1,408 |
|
Datasheet |
20-SOIC (0.433", 11.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 8 | 1:8 | Low Side | - | SPI | 4.5V ~ 5.5V | - | - | 550mOhm | - | Status Flag | Current Limiting (Fixed) | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PowerSO-20 |
|
TLE7230RAUMA1IC PWR SWITCH N-CHAN 1:8 DSO-36 |
870 |
|
Datasheet |
36-BSSOP (0.433", 11.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 8 | 1:8 | Low Side | N-Channel | SPI | 4.5V ~ 5.5V | - | - | 800mOhm | - | Status Flag | Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-36 |
|
VN808CM-32-EIC PWR DRIVER N-CHAN 1:1 PWRSO36 |
582 |
|
Datasheet |
36-PowerBSSOP (0.433", 11.00mm Width) | VIPower™ | Tube | Active | General Purpose | 8 | 1:1 | High Side | N-Channel | On/Off | 10.5V ~ 45V | Not Required | 1A | 160mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Over Temperature | -40°C ~ 125°C (TJ) | - | - | Surface Mount | PowerSO-36, Bottom Pad |
|
VN808CM-EIC PWR DRIVER N-CHAN 1:1 PWRSO36 |
176 |
|
Datasheet |
36-PowerBSSOP (0.433", 11.00mm Width) | VIPower™ | Tube | Active | General Purpose | 8 | 1:1 | High Side | N-Channel | On/Off | 10.5V ~ 45V | Not Required | 700mA | 160mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Over Temperature | -40°C ~ 125°C (TJ) | - | - | Surface Mount | PowerSO-36, Bottom Pad |
|
BTS721L1XUMA1IC PWR SWITCH N-CHAN 1:1 DSO-20 |
1,583 |
|
Datasheet |
20-SOIC (0.295", 7.50mm Width) | PROFET® | Tape & Reel (TR) | Active | General Purpose | 4 | 1:1 | High Side | N-Channel | On/Off | 5V ~ 34V | Not Required | 2.5A | 85mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-DSO-20 |
|
MAX4821EUP+TIC PWR DRIVER N-CHAN 1:8 20TSSOP |
9,447 |
|
Datasheet |
20-TSSOP (0.173", 4.40mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 8 | 1:8 | Low Side | N-Channel | Parallel, Serial | 2.3V ~ 5.5V | - | 70mA | 2Ohm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-TSSOP-EP |
|
MAX4820ETP+TIC PWR DRIVER N-CHAN 1:8 20TQFN |
2,000 |
|
Datasheet |
20-WFQFN Exposed Pad | - | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 8 | 1:8 | Low Side | N-Channel | SPI | 2.3V ~ 5.5V | - | 70mA | 2Ohm | - | - | - | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 20-TQFN (4x4) |
|
MPQ5069GQV-AEC1-Z7M PROTECTION SWITCH WITH CURREN |
1,722 |
|
Datasheet |
22-PowerVFQFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | - | On/Off | 6V ~ 28V | Not Required | 15A | 7mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 125°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 22-QFN (3x5) |
|
MAX14914ATE+TIC PWR SWITCH 1:1 16TQFN |
2,845 |
|
Datasheet |
16-WQFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | - | Logic | 10V ~ 40V | 2.5V ~ 5.5V | 1.3A | 120mOhm | - | Status Flag | Current Limiting (Adjustable), Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-TQFN (4x4) |
|
MAX4820EUP+TIC PWR DRIVER N-CHAN 1:8 20TSSOP |
3,563 |
|
Datasheet |
20-TSSOP (0.173", 4.40mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 8 | 1:8 | Low Side | N-Channel | SPI | 2.3V ~ 5.5V | - | 70mA | 2Ohm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-TSSOP-EP |
|
BTS3018TCATMA1IC PWR SWITCH N-CHAN 1:1 TO263-3 |
683 |
|
Datasheet |
TO-263-3, D2PAK (2 Leads + Tab), TO-263AB | HITFET® | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 60V (Max) | Not Required | 6A | 18mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-TO263-3-2 |
|
ITS42008SBDAUMA1IC PWR SWITCH N-CHAN 1:1 DSO-36 |
1,301 |
|
Datasheet |
36-BSSOP (0.433", 11.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 8 | 1:1 | High Side | N-Channel | Parallel | 11V ~ 45V | Not Required | - | 150mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage | -25°C ~ 125°C (TJ) | - | - | Surface Mount | PG-DSO-36-26 |
|
TDE1798DPIC PWR SWITCH BIPLR 1:1 8MINIDIP |
2,706 |
|
Datasheet |
8-DIP (0.300", 7.62mm) | - | Tube | Active | General Purpose | 1 | 1:1 | High Side | Bipolar | On/Off | 6V ~ 35V | Not Required | 500mA | - | Inverting, Non-Inverting | - | Over Temperature | -25°C ~ 85°C (TA) | - | - | Through Hole | 8-Mini DIP |
|
MAX4821EUP+IC PWR DRIVER N-CHAN 1:8 20TSSOP |
573 |
|
Datasheet |
20-TSSOP (0.173", 4.40mm Width) Exposed Pad | - | Tube | Active | Relay, Solenoid Driver | 8 | 1:8 | Low Side | N-Channel | Parallel, Serial | 2.3V ~ 5.5V | - | 70mA | 2Ohm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-TSSOP-EP |
|
MAX4820ETP+IC PWR DRIVER N-CHAN 1:8 20TQFN |
3,429 |
|
Datasheet |
20-WFQFN Exposed Pad | - | Tube | Active | Relay, Solenoid Driver | 8 | 1:8 | Low Side | N-Channel | SPI | 2.3V ~ 5.5V | - | 70mA | 2Ohm | - | - | - | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 20-TQFN (4x4) |
|
ITS4880RCUMA1IC PWR SWITCH N-CHAN 1:1 DSO-36 |
1,192 |
|
Datasheet |
36-BSSOP (0.433", 11.00mm Width) Exposed Pad | miniPROFET® | Tape & Reel (TR) | Active | General Purpose | 8 | 1:1 | High Side | N-Channel | On/Off | 11V ~ 45V | Not Required | 625mA | 150mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Over Temperature, Over Voltage | -30°C ~ 85°C (TA) | - | - | Surface Mount | PG-DSO-36-26 |
|
ISO1H811GAUMA1IC PWR DRIVER N-CHAN 1:1 DSO-36 |
1,965 |
|
Datasheet |
36-BSSOP (0.433", 11.00mm Width) Exposed Pad | ISOFACE™ | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 8 | 1:1 | High Side | N-Channel | Parallel | 11V ~ 35V | 3V ~ 5.5V | 625mA | 150mOhm | - | Auto Restart | Current Limiting (Fixed), Over Temperature, Over Voltage | -25°C ~ 125°C (TJ) | - | - | Surface Mount | PG-DSO-36 |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Power Distribution Switches, Load Drivers components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.