| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VN16BSPTR-EIC PWR DRIVER N-CHAN 1:1 PWRSO10 |
2,864 |
|
Datasheet |
PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 6V ~ 26V | Not Required | 20A | 60mOhm (Max) | Non-Inverting | Status Flag | Open Load Detect, Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
VND1NV04-EIC PWR DRIVER N-CHANNEL 1:1 DPAK |
4,681 |
|
Datasheet |
TO-252-3, DPAK (2 Leads + Tab), SC-63 | OMNIFET II™, VIPower™ | Tube | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 36V (Max) | Not Required | 1.7A | 250mOhm (Max) | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | DPAK |
|
DRV102FKTWTG3IC PWR DRIVER BIPOLAR 1:1 7DDPAK |
1,810 |
|
- |
TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | - | Tape & Reel (TR) | Obsolete | Relay, Solenoid Driver | 1 | 1:1 | High Side | Bipolar | On/Off | 8V ~ 60V | Not Required | 2A | - | Non-Inverting | Internal PWM, Status Flag | Current Limiting (Fixed), Over Temperature | -55°C ~ 125°C (TA) | - | - | Surface Mount | TO-263 (DDPAK-7) |
|
MIC2074-1YMIC PWR SWITCH N-CHAN 1:2 8SOIC |
2,010 |
|
Datasheet |
8-SOIC (0.154", 3.90mm Width) | - | Tube | Obsolete | General Purpose | 2 | 1:2 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 500mA | 115mOhm | Non-Inverting | Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MIC2074-2YMIC PWR SWITCH N-CHAN 1:2 8SOIC |
3,619 |
|
Datasheet |
8-SOIC (0.154", 3.90mm Width) | - | Tube | Obsolete | General Purpose | 2 | 1:2 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 500mA | 115mOhm | Non-Inverting | Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
AMIS39100PNPB3GIC PWR DRIVER 1:8 28SOIC |
3,065 |
|
Datasheet |
28-SOIC (0.295", 7.50mm Width) | - | Tube | Obsolete | General Purpose | 8 | 1:8 | High Side | - | SPI | 3.5V ~ 16V | 3.1V ~ 5.5V | 350mA | 1Ohm | - | - | Over Temperature | -40°C ~ 175°C (TJ) | - | - | Surface Mount | 28-SOIC |
|
FPF2165RIC PWR SWITCH P-CH 1:1 6MICROFET |
3,467 |
|
- |
6-WDFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.5A | 95mOhm | Non-Inverting | Status Flag | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
FPF1014IC PWR SWITCH N-CHAN 1:1 6WLCSP |
3,143 |
|
- |
6-UFBGA, WLCSP | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.8V ~ 1.8V | Not Required | 1.5A | 17mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-WLCSP (0.96x1.66) |
|
FPF1015IC PWR SWITCH N-CH 1:1 6MICROFET |
4,313 |
|
Datasheet |
6-VDFN Exposed Pad | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.8V ~ 1.8V | Not Required | 1.5A | 34mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
FPF1018IC PWR SWITCH N-CH 1:1 6MICROFET |
3,139 |
|
- |
6-VDFN Exposed Pad | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.8V ~ 1.8V | Not Required | 1.5A | 34mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
TPD1044F(TE85L,F)IC IPS LOW SIDE 41V 1A PS-8 |
1,754 |
|
- |
8-SMD, Flat Leads | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 3V ~ 6V | Not Required | 1A | 440mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 125°C (TA) | - | - | Surface Mount | PS-8 (2.9x2.4) |
|
FPF2300MPXIC PWR SWITCH P-CHAN 1:2 8MLP |
2,353 |
|
Datasheet |
8-WDFN Exposed Pad | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:2 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.1A | 75mOhm | Non-Inverting | Auto Restart, Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MLP (3x3) |
|
FPF2300MXIC PWR SWITCH P-CHANNEL 1:2 8SOP |
1,504 |
|
Datasheet |
8-SOIC (0.154", 3.90mm Width) | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:2 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.1A | 75mOhm | Non-Inverting | Auto Restart, Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
FPF2302MPXIC PWR SWITCH P-CHAN 1:2 8MLP |
3,464 |
|
Datasheet |
8-WDFN Exposed Pad | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:2 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.1A | 75mOhm | Non-Inverting | Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MLP (3x3) |
|
FPF2302MXIC PWR SWITCH P-CHANNEL 1:2 8SOP |
3,805 |
|
Datasheet |
8-SOIC (0.154", 3.90mm Width) | IntelliMAX™ | Tube | Obsolete | General Purpose | 2 | 1:2 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.1A | 75mOhm | Non-Inverting | Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
FPF2310MPXIC LOAD SW 2CH ADJ CURR 8-MLP |
3,636 |
|
- |
- | * | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
FPF2312MPXIC PWR SWITCH P-CHAN 1:2 8MLP |
1,763 |
|
Datasheet |
8-WDFN Exposed Pad | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:2 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 600mA | 75mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MLP (3x3) |
|
FPF2313LMPXIC PWR SWITCH P-CHAN 1:2 8MLP |
4,907 |
|
Datasheet |
8-WDFN Exposed Pad | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:2 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 600mA | 75mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MLP (3x3) |
|
FPF2313MPXIC PWR SWITCH P-CHAN 1:2 8MLP |
2,248 |
|
Datasheet |
8-WDFN Exposed Pad | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:2 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 600mA | 75mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MLP (3x3) |
|
BTS500501EGAAUMA1IC PWR SWITCH N-CHAN 1:1 DSO-12 |
3,519 |
|
Datasheet |
12-BSOP (0.295", 7.50mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 6V ~ 28V | Not Required | 16A | 5mOhm | - | Auto Restart | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-12-16 |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Power Distribution Switches, Load Drivers components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.