| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Programmable | Type | Number of Voltages Monitored | Voltage - Threshold | Output | Reset | Reset Timeout | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MN13812-QIC SUPERVISOR 1 CHANNEL TO92 |
3,807 |
|
Datasheet |
- | TO-226-3, TO-92-3 (TO-226AA) | Bulk | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 3.8V | CMOS Inverted | Active Low | 3µs Typical | -20°C ~ 70°C (TA) | - | - | Through Hole | TO-92-3 |
|
MN13812-UIC SUPERVISOR 1 CHANNEL TO92 |
2,219 |
|
Datasheet |
- | TO-226-3, TO-92-3 (TO-226AA) | Bulk | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.6V | CMOS Inverted | Active Low | 3µs Typical | -20°C ~ 70°C (TA) | - | - | Through Hole | TO-92 |
|
TC54VC2902EZBIC SUPERVISOR 1 CHANNEL TO92-3 |
2,673 |
|
Datasheet |
- | TO-226-3, TO-92-3 (TO-226AA) | Bag | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 2.9V | Push-Pull, Totem Pole | Active Low | - | -40°C ~ 85°C (TA) | - | - | Through Hole | TO-92-3 |
|
MAX1232CPAIC SUPERVISOR 1 CHANNEL 8DIP |
1,711 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.37V, 4.62V | Open Drain or Open Collector | Active High/Active Low | 250ms Minimum | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
MAX1232CSAIC SUPERVISOR 1 CHANNEL 8SOIC |
3,533 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.37V, 4.62V | Open Drain or Open Collector | Active High/Active Low | 250ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MAX690CPAIC SUPERVISOR 1 CHANNEL 8DIP |
3,534 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Not Verified | Battery Backup Circuit | 1 | 4.65V | Push-Pull, Totem Pole | Active Low | 35ms Minimum | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
MAX692ACPAIC SUPERVISOR 1 CHANNEL 8DIP |
2,073 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Not Verified | Battery Backup Circuit | 1 | 4.4V | Push-Pull, Totem Pole | Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
MAX693CWEIC SUPERVISOR 1 CHANNEL 16SOIC |
2,764 |
|
Datasheet |
- | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Not Verified | Battery Backup Circuit | 1 | 4.4V | Push-Pull, Push-Pull | Active High/Active Low | 35ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
MAX703CSAIC SUPERVISOR 1 CHANNEL 8SOIC |
2,599 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Not Verified | Battery Backup Circuit | 1 | 4.65V | Push-Pull, Totem Pole | Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
MAX707CSAIC SUPERVISOR 1 CHANNEL 8SOIC |
3,703 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.65V | Push-Pull, Push-Pull | Active High/Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MAX802MCPAIC SUPERVISOR 1 CHANNEL 8DIP |
1,719 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Not Verified | Battery Backup Circuit | 1 | 4.4V | Push-Pull, Totem Pole | Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Through Hole | 8-PDIP |
|
|
MAX8211CSAIC SUPERVISOR 1 CHANNEL 8SOIC |
4,487 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | Adjustable/Selectable | Open Drain or Open Collector | Active Low | <1ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MAX792LCPEIC SUPERVISOR 1 CHANNEL 16DIP |
4,277 |
|
Datasheet |
- | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.62V | Push-Pull, Push-Pull | Active High/Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
|
TC54VN4302EZBIC SUPERVISOR 1 CHANNEL TO92-3 |
2,926 |
|
Datasheet |
- | TO-226-3, TO-92-3 (TO-226AA) | Bag | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.3V | Open Drain or Open Collector | Active Low | - | -40°C ~ 85°C (TA) | - | - | Through Hole | TO-92-3 |
|
TC54VN2902EZBIC SUPERVISOR 1 CHANNEL TO92-3 |
4,801 |
|
Datasheet |
- | TO-226-3, TO-92-3 (TO-226AA) | Bag | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 2.9V | Open Drain or Open Collector | Active Low | - | -40°C ~ 85°C (TA) | - | - | Through Hole | TO-92-3 |
|
ZM33164N8TAIC SUPERVISOR 1 CHANNEL 8SOP |
2,227 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.3V | Open Drain or Open Collector | Active Low | 2µs Typical Propagation Delay | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SO |
|
ZSM560GTAIC SUPERVISOR 1 CHANNEL SOT223 |
3,731 |
|
Datasheet |
- | TO-261-4, TO-261AA | Tape & Reel (TR) | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 4.6V | Open Drain or Open Collector | Active Low | 1.5µs Typical Propagation Delay | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-223-3 |
|
|
MAX690ACSAIC SUPERVISOR 1 CHANNEL 8SOIC |
2,974 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Not Verified | Battery Backup Circuit | 1 | 4.65V | Push-Pull, Totem Pole | Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
MAX706SCSAIC SUPERVISOR 1 CHANNEL 8SOIC |
2,678 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Not Verified | Simple Reset/Power-On Reset | 1 | 2.93V | Push-Pull, Totem Pole | Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
MAX791CSEIC SUPERVISOR 1 CHANNEL 16SOIC |
3,470 |
|
Datasheet |
- | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Not Verified | Battery Backup Circuit | 1 | 4.65V | Push-Pull, Totem Pole | Active Low | 140ms Minimum | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Supervisors components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.