| Manufacturer | Series | Package/Case | Packaging | Product Status | Output Configuration | Output Type | Number of Regulators | Voltage - Input (Max) | Voltage - Output (Min/Fixed) | Voltage - Output (Max) | Voltage Dropout (Max) | Current - Output | Current - Quiescent (Iq) | Current - Supply (Max) | PSRR | Control Features | Protection Features | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Output Configuration | Output Type | Number of Regulators | Voltage - Input (Max) | Voltage - Output (Min/Fixed) | Voltage - Output (Max) | Voltage Dropout (Max) | Current - Output | Current - Quiescent (Iq) | Current - Supply (Max) | PSRR | Control Features | Protection Features | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM1086IS-5.0/NOPBIC REG LIN 5V 1.5A DDPAK/TO263-3 |
3,678 | - |
|
Datasheet |
- | TO-263-4, D2PAK (3 Leads + Tab), TO-263AA | Tube | Active | Positive | Fixed | 1 | 25V | 5V | - | 1.5V @ 1.5A | 1.5A | 5 mA | 10 mA | 68dB (120Hz) | - | Over Current, Over Temperature, Short Circuit | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-3) |
|
BA17808CP-E2IC REG LINEAR 8V 1A TO220CP-3 |
4,695 | - |
|
Datasheet |
- | TO-220-3 Cropped Leads | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 23V | 8V | - | 2V @ 1A (Typ) | 1A | 4.5 mA | 6 mA | 65dB (120Hz) | - | - | -40°C ~ 85°C | - | - | Through Hole | TO-220CP-3 |
|
LM9076S-5.0/NOPBIC REG LIN 5V 150MA DDPAK/TO263 |
3,242 | - |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tube | Active | Positive | Fixed | 1 | 40V | 5V | - | 0.25V @ 150mA | 150mA | 45 µA | 4.5 mA | 60dB (120kHz) | Reset | Over Temperature | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
ISL80121IR50ZIC REG LINEAR 5V 1A 10DFN |
987 | - |
|
Datasheet |
- | 10-VFDFN Exposed Pad | Tube | Active | Positive | Fixed | 1 | 6V | 5V | - | 0.13V @ 1A | 1A | 5 mA | 7 mA | 40dB (1kHz) | Current Limit, Enable, Power Good, Soft Start | Over Temperature | -40°C ~ 125°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LP38841S-1.2/NOPBIC REG LINEAR 1.2V 800MA DDPAK |
4,603 | - |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tube | Active | Positive | Fixed | 1 | 5.5V | 1.2V | - | 0.21V @ 800mA | 800mA | 30 µA | 40 mA | 80dB ~ 65dB (120Hz ~ 1kHz) | Enable | Over Current, Over Temperature, Short Circuit | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
MIC5239-5.0YMMIC REG LINEAR 5V 500MA 8MSOP |
1,653 | - |
|
Datasheet |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Positive | Fixed | 1 | 30V | 5V | - | 0.35V @ 500mA (Typ) | 500mA | 45 µA | 15 mA | - | Enable | Over Current, Over Temperature, Over Voltage, Reverse Polarity | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
BA33DD0TIC REG LINEAR 3.3V 2A TO220FP |
1,741 | - |
|
Datasheet |
- | TO-220-3 Full Pack | Tube | Active | Positive | Fixed | 1 | 25V | 3.3V | - | 0.7V @ 2A | 2A | 120 µA | - | 55dB (120Hz) | - | Over Current, Over Temperature, Over Voltage | -40°C ~ 125°C | - | - | Through Hole | TO-220FP |
|
ISL78310ARAJZ-T7AIC REG LINEAR POS ADJ 1A 10DFN |
100 | - |
|
Datasheet |
- | 10-VFDFN Exposed Pad | Tape & Reel (TR) | Active | Positive | Adjustable | 1 | 6V | 0.8V | 5V | 0.212V @ 1A | 1A | 5 mA | 7 mA | 72dB ~ 58dB (120Hz ~ 1KHz) | Enable, Power Good, Soft Start | Over Temperature, Short Circuit | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 10-DFN (3x3) |
|
LP38853MR-ADJ/NOPBIC REG LIN POS ADJ 3A 8SO PWRPAD |
1,910 | - |
|
Datasheet |
- | 8-PowerSOIC (0.154", 3.90mm Width) | Tube | Active | Positive | Adjustable | 1 | 5.5V | 0.8V | 1.8V | 0.45V @ 3A | 3A | 300 µA | 9 mA | 80dB ~ 70dB (120Hz ~ 1kHz) | Enable, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | 8-SO PowerPad |
|
LT1117CM-5#PBFIC REG LINEAR 5V 800MA D2PAK-3 |
3,344 | - |
|
Datasheet |
- | TO-263-4, D2PAK (3 Leads + Tab), TO-263AA | Tube | Active | Positive | Fixed | 1 | 15V | 5V | - | 1.2V @ 800mA | 800mA | 10 mA | - | 75dB (120Hz) | - | Over Temperature | 0°C ~ 125°C | - | - | Surface Mount | DDPAK-3 |
|
LT1763IS8-1.5#PBFIC REG LINEAR 1.5V 500MA 8SOIC |
4,515 | - |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Positive | Fixed | 1 | 20V | 1.5V | - | 0.45V @ 500mA | 500mA | - | - | 65dB (120Hz) | Enable | Over Current, Over Temperature, Reverse Polarity | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
LT3015EMSE#PBFIC REG LIN NEG ADJ 1.5A 12MSOP |
1,720 | - |
|
Datasheet |
- | 12-TSSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Active | Negative | Adjustable | 1 | -30V | -1.22V | -29.5V | 0.5V @ 1.5A | 1.5A | 2.4 mA | 70 mA | 65dB (120Hz) | Enable | Over Current, Over Temperature, Reverse Polarity | -40°C ~ 125°C | - | - | Surface Mount | 12-MSOP-EP |
|
LT3042HMSE#PBFIC REG LIN POS ADJ 200MA 10MSOP |
3,641 | - |
|
Datasheet |
- | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Active | Positive | Adjustable | 1 | 20V | 0V | 15V | 0.35V @ 200mA (Typ) | 200mA | - | - | 117dB ~ 56dB (120Hz ~ 10MHz) | Current Limit, Enable, Power Good | Over Temperature, Reverse Polarity | -40°C ~ 150°C | - | - | Surface Mount | 10-MSOP-EP |
|
MIC29501-3.3WUIC REG LINEAR 3.3V 5A TO263-5 |
1,806 | - |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tube | Active | Positive | Fixed | 1 | 26V | 3.3V | - | 0.6V @ 5A | 5A | - | - | - | Enable | Over Current, Over Temperature, Reverse Polarity, Transient Voltage | -40°C ~ 125°C | - | - | Surface Mount | TO-263-5 |
|
LT3015IQ-2.5#PBFIC REG LINEAR -2.5V 1.5A 5DDPAK |
100 | - |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tube | Active | Negative | Fixed | 1 | -30V | -2.5V | - | 0.68V @ 1.5A | 1.5A | 2.4 mA | 70 mA | 62dB (120Hz) | Enable | Over Current, Over Temperature, Reverse Polarity | -40°C ~ 125°C | - | - | Surface Mount | DDPAK-5 |
|
LT3091IT7#PBFIC REG LIN NEG ADJ 1.5A TO220-7 |
1,646 | - |
|
Datasheet |
- | TO-220-7 Formed Leads | Tube | Active | Negative | Adjustable | 1 | -36V | 0V | -32V | 0.525V @ 1.5A | 1.5A | 50.5 µA | - | 85dB ~ 20dB (120Hz ~ 1MHz) | Current Limit, Enable | Over Current, Over Temperature, Reverse Polarity, Short Circuit | -40°C ~ 125°C | - | - | Through Hole | TO-220-7 |
|
LT1084CT-3.3#PBFIC REG LINEAR 3.3V 5A TO220-3 |
1,855 | - |
|
Datasheet |
- | TO-220-3 | Tube | Active | Positive | Fixed | 1 | 20V | 3.3V | - | 1.5V @ 5A | 5A | 10 mA | - | 72dB (120Hz) | - | Over Temperature | 0°C ~ 125°C | - | - | Through Hole | TO-220-3 |
|
LT3060MPTS8-3.3#TRMPBFIC REG LIN 3.3V 100MA TSOT23-8 |
3,668 | - |
|
Datasheet |
- | SOT-23-8 Thin, TSOT-23-8 | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 45V | 3.3V | - | 0.51V @ 100mA | 100mA | 80 µA | 4 mA | 70dB (120Hz) | Enable, Soft Start | Over Current, Over Temperature, Reverse Polarity | -55°C ~ 150°C | - | - | Surface Mount | TSOT-23-8 |
|
LT3088MPM#PBFIC REG LIN POS ADJ 800MA 3DDPAK |
1,656 | - |
|
Datasheet |
- | TO-263-4, D2PAK (3 Leads + Tab), TO-263AA | Tube | Active | Positive | Adjustable | 1 | 36V | 0V | 34.5V | 1.6V @ 800mA | 800mA | 50.5 µA | 2 mA | 90dB ~ 20dB (120Hz ~ 1MHz) | - | Over Current, Over Temperature, Reverse Polarity, Short Circuit | -55°C ~ 150°C | - | - | Surface Mount | DDPAK-3 |
|
|
LM137HIC REG LIN NEG ADJ 1.5A TO3 |
1,376 | - |
|
Datasheet |
- | TO-205AD, TO-39-3 Metal Can | Bulk | Active | Negative | Adjustable | 1 | -40V | -1.2V | -37V | - | 1.5A | - | - | 66dB (120Hz) | - | Over Current, Over Temperature, Short Circuit | -55°C ~ 150°C | - | - | Through Hole | TO-3 |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Voltage Regulators - Linear, Low Drop Out (LDO) Regulators components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.