| Manufacturer | Series | Package/Case | Packaging | Product Status | Output Configuration | Output Type | Number of Regulators | Voltage - Input (Max) | Voltage - Output (Min/Fixed) | Voltage - Output (Max) | Voltage Dropout (Max) | Current - Output | Current - Quiescent (Iq) | Current - Supply (Max) | PSRR | Control Features | Protection Features | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Output Configuration | Output Type | Number of Regulators | Voltage - Input (Max) | Voltage - Output (Min/Fixed) | Voltage - Output (Max) | Voltage Dropout (Max) | Current - Output | Current - Quiescent (Iq) | Current - Supply (Max) | PSRR | Control Features | Protection Features | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LX8221-GIDUIC REG LINEAR POS ADJ 10MSOP |
8,528 | - |
|
Datasheet |
- | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Positive | Adjustable (Fixed) | 2 | 6V | 1.175V (3V) | 5.6V | 0.4V @ 150mA, 0.4V @ 150mA | 150mA, 150mA | 440 µA | - | 50dB (120Hz) | Enable | Over Current, Over Temperature | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
MIC39501-2.5WU5 AMP MICROCAP LOW-VOLTAGE LOW-D |
1,500 | - |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Bulk | Active | Positive | Fixed | 1 | 16V | 2.5V | - | 0.575V @ 5A | 5A | - | - | - | Enable | Over Current, Over Temperature, Reverse Polarity | -40°C ~ 125°C | - | - | Surface Mount | TO-263-5 |
|
TPS72618KTTTIC REG LIN 1.8V 1A DDPAK/TO263-5 |
1,842 | - |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Tape & Reel (TR) | Obsolete | Positive | Fixed | 1 | 6V | 1.8V | - | 0.32V @ 1A | 1A | 120 µA | 300 µA | 60dB (1kHz) | Enable, Reset | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
|
REG104GA-3.3G4IC REG LINEAR 3.3V 1A SOT223-6 |
1,363 | - |
|
Datasheet |
- | SOT-223-6 | Bulk | Obsolete | Positive | Fixed | 1 | 15V | 3.3V | - | 0.48V @ 1A | 1A | 0.7 mA | 1.8 mA | 65dB (120Hz) | Enable | Over Current, Over Temperature | -40°C ~ 85°C | - | - | Surface Mount | SOT-223-6 |
|
MAX8883EUTAADUAL, LOW-NOISE, LOW-DROPOUT, 16 |
1,365 | - |
|
Datasheet |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX8883EUTGGIC REG LINEAR LDO |
1,181 | - |
|
Datasheet |
- | SOT-23-6 | Bulk | Active | Positive | Fixed | 2 | 6.5V | 3.3V, 3.3V | - | 0.144V @ 80mA | 160mA, 160mA | 265 µA | - | 10dB (100Hz) | Enable | Over Current, Over Temperature, Short Circuit | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-6 |
|
TPS72515DCQIC REG LINEAR 1.5V 1A SOT223-6 |
1,803 | - |
|
Datasheet |
- | SOT-223-6 | Bulk | Obsolete | Positive | Fixed | 1 | 6V | 1.5V | - | 0.32V @ 1A | 1A | 225 µA | 325 µA | 60dB (1kHz) | Enable, Reset | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | SOT-223-6 |
|
TPS726126DCQIC REG LINEAR 1.26V 1A SOT223-6 |
1,321 | - |
|
Datasheet |
- | SOT-223-6 | Bulk | Obsolete | Positive | Fixed | 1 | 6V | 1.26V | - | 0.32V @ 1A | 1A | 120 µA | 300 µA | 60dB (1kHz) | Enable, Reset | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | SOT-223-6 |
|
TPS72625DCQIC REG LINEAR 2.5V 1A SOT223-6 |
1,976 | - |
|
Datasheet |
- | SOT-223-6 | Bulk | Obsolete | Positive | Fixed | 1 | 6V | 2.5V | - | 0.28V @ 1A | 1A | 120 µA | 300 µA | 60dB (1kHz) | Enable, Reset | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | SOT-223-6 |
|
TPS72615DCQIC REG LINEAR 1.5V 1A SOT223-6 |
133 | - |
|
Datasheet |
- | SOT-223-6 | Bulk | Obsolete | Positive | Fixed | 1 | 6V | 1.5V | - | 0.32V @ 1A | 1A | 120 µA | 300 µA | 60dB (1kHz) | Enable, Reset | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | SOT-223-6 |
|
TPS72501DCQIC REG LINEAR POS ADJ 1A SOT223 |
203 | - |
|
Datasheet |
- | SOT-223-6 | Tube | Obsolete | Positive | Adjustable | 1 | 6V | 1.22V | 5.5V | 0.28V @ 1A | 1A | 225 µA | 325 µA | 60dB (1kHz) | Enable, Reset | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | SOT-223-6 |
|
ADP1707ACPZ-1.8-R7IC REG LINEAR 1.8V 1A 8LFCSP |
4,291 | - |
|
Datasheet |
- | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 5.5V | 1.8V | - | 0.6V @ 1A | 1A | 390 µA | 1.55 mA | - | Enable, Tracking | Over Current, Over Temperature | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 8-LFCSP (3x3) |
|
ADP1754ACPZ-1.5-R7IC REG LINEAR 1.5V 1.2A 16LFCSP |
1,380 | - |
|
Datasheet |
- | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 3.6V | 1.5V | - | - | 1.2A | 800 µA | 1.4 mA | - | Enable, Power Good, Soft Start | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
ADP7142ACPZN3.8-R7IC REG LINEAR 3.8V 200MA 6LFCSP |
4,368 | - |
|
Datasheet |
- | 6-UDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 40V | 3.8V | - | 0.42V @ 200mA | 200mA | 140 µA | 320 µA | 88dB ~ 50dB (10kHz ~ 1MHz) | Enable, Soft Start | Over Temperature, Short Circuit | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 6-LFCSP-UD (2x2) |
|
LT3094IMSE#TRPBFIC REG LIN NEG ADJ 500MA 12MSOP |
3,965 | - |
|
Datasheet |
- | 12-TSSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Negative | Adjustable | 1 | -2.3V | -19.5V | 0V | 0.41V @ 500mA | 500mA | 2.35 mA | 23 mA | 108dB ~ 28dB (120Hz ~ 10MHz) | Enable, Power Good, Soft Start | Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | 12-MSOP-EP |
|
ADP1754ACPZ-0.75R7IC REG LINEAR 0.75V 1.2A 16LFCSP |
1,724 | - |
|
Datasheet |
- | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 3.6V | 0.75V | - | - | 1.2A | 800 µA | 1.4 mA | 65dB ~ 54dB (1kHz ~ 100kHz) | Enable, Power Good, Soft Start | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
MAX1792EUA25/V+IC REG LIN POS ADJ 500MA 8UMAX |
490 | - |
|
Datasheet |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Active | Positive | Adjustable (Fixed) | 1 | 5.5V | 1.25V (2.5V) | 5V | 0.36V @ 500mA | 500mA | 250 µA | - | - | Enable, Reset | Over Current, Over Temperature | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-uMAX-EP|8-uSOP-EP |
|
ADP7142ARDZ-1.8-R7IC REG LINEAR 1.8V 200MA 8SOIC |
3,725 | - |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 40V | 1.8V | - | - | 200mA | 140 µA | 320 µA | - | Enable, Soft Start | Over Temperature, Short Circuit | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC-EP |
|
TLV1117-25CKVURG3IC REG LINEAR 2.5V 800MA TO252-3 |
4,451 | - |
|
Datasheet |
- | TO-252-3, DPAK (2 Leads + Tab), SC-63 | Tape & Reel (TR) | Active | Positive | Fixed | 1 | 15V | 2.5V | - | 1.3V @ 800mA | 800mA | 10 mA | - | 75dB (120Hz) | - | Over Current, Over Temperature | 0°C ~ 125°C | - | - | Surface Mount | TO-252-3 |
|
UC382TDTR-3IC REG LIN 2.5V 3A DDPAK/TO263-5 |
13,500 | - |
|
Datasheet |
- | TO-263-6, D2PAK (5 Leads + Tab), TO-263BA | Bulk | Obsolete | Positive | Fixed | 1 | 7.5V | 2.5V | - | 2.1V @ 3A | 3A | - | - | - | - | Over Temperature, Reverse Polarity, Short Circuit | 0°C ~ 100°C | - | - | Surface Mount | TO-263 (DDPAK-5) |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Voltage Regulators - Linear, Low Drop Out (LDO) Regulators components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.