| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Output Type | Function | Output Configuration | Topology | Number of Outputs | Output Phases | Voltage - Supply (Vcc/Vdd) | Frequency - Switching | Duty Cycle (Max) | Synchronous Rectifier | Clock Sync | Serial Interfaces | Control Features | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MCP19119T-E/MQVAO40V POINT OF LOAD CONVERTER |
2,834 |
|
Datasheet |
- | 28-VFQFN Exposed Pad | Tape & Reel (TR) | Active | Transistor Driver | Step-Down | Positive | Buck | 1 | 1 | 4.5V ~ 40V | 100kHz ~ 1.6MHz | - | Yes | No | I2C, PMBus, SMBus | Phase Control | -40°C ~ 125°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 28-QFN (5x5) |
|
MCP1630-E/MSVAOHIGH SPEED PULSE WIDTH MODULATOR |
2,447 |
|
Datasheet |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Transistor Driver | Step-Up, Step-Down, Step-Up/Step-Down | Positive, Isolation Capable | Buck, Boost, Buck-Boost, Flyback, SEPIC | 1 | 1 | 3V ~ 5.5V | - | - | Yes | No | - | - | -40°C ~ 125°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 8-MSOP |
|
MCP19118-E/MJVAO40V POINT OF LOAD CONVERTER |
2,734 |
|
Datasheet |
- | 24-VFQFN Exposed Pad | Tube | Active | Transistor Driver | Step-Down | Positive | Buck | 1 | 1 | 4.5V ~ 40V | 100kHz ~ 1.6MHz | - | Yes | No | I2C, PMBus, SMBus | Phase Control | -40°C ~ 125°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 24-QFN (4x4) |
|
MCP19119-E/MQVAO40V POINT OF LOAD CONVERTER |
1,330 |
|
Datasheet |
- | 28-VFQFN Exposed Pad | Tube | Active | Transistor Driver | Step-Down | Positive | Buck | 1 | 1 | 4.5V ~ 40V | 100kHz ~ 1.6MHz | - | Yes | No | I2C, PMBus, SMBus | Phase Control | -40°C ~ 125°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 28-QFN (5x5) |
|
AP2001SG-13IC CONVERTER DC/DC 16SOP |
1,447 |
|
- |
- | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Transistor Driver | Step-Down | Positive | Buck | 2 | 1 | 3.6V ~ 40V | 1kHz ~ 500kHz | - | No | No | - | Dead Time Control | -20°C ~ 85°C | - | - | Surface Mount | 16-SOP |
|
AP1624WG-7IC CONVERTER DC/DC SOT25 |
2,246 |
|
- |
- | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Transistor Driver | Step-Up | Positive | Boost | 1 | 1 | 0.9V ~ 6V | 300kHz | 80% | No | No | - | Enable | -30°C ~ 105°C (TJ) | - | - | Surface Mount | SOT-25 |
|
AA520A-01-1014-GLFINTEGRATED CIRCUITS |
1,892 |
|
- |
* | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LX1671BCLQ-TRTRANSCEIVER |
1,720 |
|
Datasheet |
- | 38-VFQFN Exposed Pad | Bulk | Obsolete | PWM | - | Positive | Buck | 4 | 1 | 4.5V ~ 5.5V | 300kHz | 91% | No | No | - | Enable, Soft Start | 0°C ~ 70°C (TA) | - | - | Surface Mount | 38-MLPQ (5x7) |
|
NX2114ACSTRIC PWM CONTROLLER |
1,924 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | PWM | Step-Down | Positive | Buck | 1 | 1 | 4.5V ~ 5.5V | 600kHz | 94% | Yes | No | - | Enable, Soft Start | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
NX2114CSTRIC PWM CONTROLLER |
3,459 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | PWM | Step-Down | Positive | Buck | 1 | 1 | 4.5V ~ 5.5V | 300kHz | 94% | Yes | No | - | Enable, Soft Start | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
NX2305CSTRIC PWM CONTROLLER |
2,526 |
|
Datasheet |
- | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | PWM | Step-Down | Positive | Buck | 2 | 1 | 8.2V ~ 14V | 300kHz | 94% | Yes | No | - | Enable, Power Good, Soft Start | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
NX2601CMTRIC PWM CONTROLLER |
1,255 |
|
Datasheet |
- | 32-VFQFN Exposed Pad | Bulk | Obsolete | PWM | - | Positive | Buck | 3 | 2 | 4.5V ~ 5.5V | 600kHz | - | Yes | No | - | Enable, Soft Start | 0°C ~ 70°C | - | - | Surface Mount | 32-MLPQ (5x5) |
|
MAX20028ATJA/V+STEP-DOWN CONTROLLER |
1,695 |
|
- |
- | 32-WFQFN Exposed Pad | Bulk | Obsolete | PWM | Step-Down | Positive | Buck | 3 | - | 3.5V ~ 36V | 350kHz ~ 2.1MHz | 97.2% | Yes | Yes | - | Enable | -40°C ~ 125°C (TJ) | Automotive | AEC-Q100 | Surface Mount, Wettable Flank | 32-WETQFN (5x5) |
|
RT8880AGQWIC PWM CTLR DUAL 52WQFN |
3,713 |
|
Datasheet |
- | 52-QFN | Tape & Reel (TR) | Obsolete | PWM | - | - | - | 2 | 3 | 4.5V ~ 5.5V | 300kHz | - | No | No | - | - | -40°C ~ 85°C (TA) | - | - | - | 52-QFN (6x6) |
|
RT8880BGQWIC PWM CTLR DUAL 52WQFN |
4,480 |
|
Datasheet |
- | 52-QFN | Tape & Reel (TR) | Obsolete | PWM | - | - | - | 2 | 3 | 4.5V ~ 5.5V | 300kHz | - | No | No | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 52-QFN (6x6) |
|
RT8899AGQWIC PWM CTLR DUAL 52WQFN |
2,259 |
|
- |
- | 52-QFN | Tape & Reel (TR) | Obsolete | PWM | - | - | - | 2 | 3 | 5V | 300kHz | - | No | No | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 52-QFN (6x6) |
|
RT8159GSIC REGULATOR 14SOP |
4,857 |
|
- |
- | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | PWM | Step-Down | Positive | Buck | 2 | 2 | 10.8V ~ 13.2V | Up to 1MHz | - | Yes | No | - | Enable, Phase Control | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOP |
|
MAX20098ATEA/VY+IC LED CONTROLLER |
4,507 |
|
Datasheet |
- | 16-TQFN Exposed Pad | Strip | Active | Transistor Driver | Step-Down | Positive | Buck | 1 | - | 3.5V ~ 42V | 2.2MHz | 99% | Yes | Yes | - | Power Good | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | - |
|
NCP1031AMNTXGANA BIAS REGULATOR CNTRLR |
2,967 |
|
- |
- | 8-VDFN Exposed Pad | Tape & Reel (TR) | Obsolete | PWM | Step-Up | Positive | Boost | 1 | 1 | 8V ~ 16V | 300kHz ~ 800kHz | 80% | Yes | Yes | - | Over/Under Voltage Shutdown | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 8-DFN (4x4) |
|
P9149VWTNRG2SUZUKI DPU 12-VFQFPN |
4,314 |
|
- |
* | - | Tray | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing DC DC Switching Controllers components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.