| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLC2252AQDREPTLC2252A-EP - ENHANCED PRODUCT A |
1,420 |
|
Datasheet |
LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.12V/µs | 210 kHz | - | 1 pA | 200 µV | 80µA (x2 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
OPA4137PIC OPAMP JFET 4 CIRCUIT 14DIP |
300 |
|
Datasheet |
MicroAmplifier™ | 14-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 5 pA | 1.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LT1803IS8LT1803 - 85MHZ, 100V/US R-TO-R I |
3,510 |
|
Datasheet |
* | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | - | 88V/µs | 83 MHz | - | 2.5 µA | 1.5 mV | 2.5mA | 50 mA | - | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
EL5246YZEL5246 - DUAL, SINGLE-SUPPLY RAI |
2,000 |
|
Datasheet |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
HFA1205IPDUAL, 425MHZ, LOW POWER, VIDEO O |
1,006 |
|
Datasheet |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | - | 2400V/µs | - | 425 MHz | 6 µA | 2 mV | 5.8mA (x2 Channels) | 60 mA | - | - | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
EL5462ISZOPERATIONAL AMPLIFIER |
366 |
|
Datasheet |
- | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 4 | - | 4000V/µs | - | 500 MHz | 2 µA | 1.5 mV | 1.5mA (x4 Channels) | 100 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LMH6672MA/NOPBLMH6672 DUAL, HIGH OUTPUT CURREN |
1,020 |
|
Datasheet |
LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 135V/µs | - | 90 MHz | 8 µA | 100 µV | 7.2mA (x2 Channels) | 525 mA | 5 V | 12 V | -40°C ~ 150°C | - | - | Surface Mount | 8-SOIC |
|
LMH6628MA/NOPBLMH6628 DUAL WIDEBAND, LOW NOISE |
977 |
|
Datasheet |
LMV® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 550V/µs | 200 MHz | 300 MHz | 700 nA | 500 µV | 9mA (x2 Channels) | 85 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
HFA1130IP850MHZ, OUTPUT LIMITING, LOW DIS |
4,375 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 2300V/µs | - | 850 MHz | 25 µA | 2 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
HFA1115IPBUFFER AMPLIFIER, 1 FUNC, BIPOLA |
465 |
|
Datasheet |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX4212EUK-TVIDEO AMPLIFIER, 1 CHANNEL(S), 1 |
7,500 |
|
Datasheet |
- | SC-74A, SOT-753 | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 600V/µs | - | 300 MHz | 5.4 µA | 4 mV | 5.5mA | 120 mA | 3.15 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
INA115AU-1/1KINA115 PRECISION INSTRUMENTATION |
2,860 |
|
Datasheet |
- | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | Instrumentation | 1 | - | 0.6V/µs | - | 1 MHz | 500 pA | 25 µV | 2.2mA | 20 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LM6142BINIC OPAMP GP 2 CIRCUIT 8DIP |
260 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x2 Channels) | 24 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
ISL28278FAZOPERATIONAL AMPLIFIER, 2 FUNC, 4 |
116 |
|
Datasheet |
- | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.15V/µs | 300 kHz | - | 10 pA | 0.2 µV | 120µA (x2 Channels) | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
OPA2613IDRIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
163,917 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | - | 70V/µs | 125 MHz | 230 MHz | 6 µA | 200 µV | 12mA (x2 Channels) | 350 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA4343UAOPA4343 QUAD-CHANNEL SINGLE-SUPP |
696 |
|
Datasheet |
MicroAmplifier™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 6V/µs | 5.5 MHz | - | 0.2 pA | 2 mV | 850µA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
LT1996CDD#PBFLT1996 - PRECISION, 100UA GAIN S |
363 |
|
Datasheet |
* | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 10-DFN (3x3) |
|
TLE2022ACPE4IC OPAMP GP 2 CIRCUIT 8DIP |
250 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.65V/µs | 2.8 MHz | - | 33 nA | 120 µV | 550µA (x2 Channels) | 30 mA | 4 V | 40 V | 0°C ~ 70°C | Automotive | AEC-Q100 | Through Hole | 8-PDIP |
|
|
LT1991CDD#PBFPRECISION, 100UA, GAIN SELECTABL |
242 |
|
Datasheet |
- | 10-WFDFN Exposed Pad | Bulk | Active | Programmable Gain | 1 | Rail-to-Rail | 0.12V/µs | 560 kHz | 110 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 10-DFN (3x3) |
|
EL8201ISZVIDEO AMPLIFIER |
15,140 |
|
Datasheet |
EL8201 | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 200V/µs | 100 MHz | 200 MHz | 1.6 µA | 800 µV | 2mA (x2 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.