| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
LT1996AIDD#PBFLT1996 - PRECISION DIFFERENCE AM |
242 |
|
Datasheet |
* | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
LTC6911HMS-2#PBFLTC6911 - DUAL DIGITALLY CONTROL |
531 |
|
Datasheet |
- | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Programmable Gain | 2 | - | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | - | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
LMH6624MALMH6624 SINGLE ULTRA LOW N |
19,270 |
|
Datasheet |
LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | - | 400V/µs | 1.5 GHz | 95 MHz | 13 µA | 100 µV | 12mA | 100 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LT1817IGN#PBFLT1817 - QUAD 220MHZ, 1500V/US O |
123 |
|
Datasheet |
LT® | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 4 | - | 1500V/µs | 220 MHz | 350 MHz | 2 µA | 200 µV | 6.5mA (x4 Channels) | 80 mA | 4 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SSOP |
|
LT1057SW#PBFLT1057 - DUAL JFET INPUT PRECISI |
188 |
|
Datasheet |
LT® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
|
LMH6503MAX/NOPBLMH6503 WIDEBAND, LOW POWER, LIN |
43,118 |
|
Datasheet |
LMH® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LT1057SW#TRPBFLT1057 - DUAL JFET INPUT PRECISI |
1,000 |
|
Datasheet |
LT® | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LTC6410IUD-6#PBFLOW DISTORTION, LOW NOISE DIFFER |
484 |
|
Datasheet |
- | 16-WFQFN Exposed Pad | Bulk | Active | RF/IF Differential | 1 | Differential | 1500V/µs | - | 1.4 GHz | - | 400 µV | 125mA | 42 mA | 2.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
|
|
LMC6084AIM/NOPBLMC6084 PRECISION CMOS QUAD OPER |
509 |
|
Datasheet |
LMC® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 2.2mA (x4 Channels) | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
HA3-2444-550MHZ, SELECTABLE, FOUR CHANNEL |
464 |
|
Datasheet |
- | 16-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 120V/µs | 50 MHz | - | 9 µA | 4 mV | 20mA | 25 mA | 17 V | 34 V | 0°C ~ 75°C | - | - | Through Hole | 16-PDIP |
|
LT1122BCN8#PBFIC OPAMP JFET 1 CIRCUIT 8DIP |
124 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 80V/µs | 14 MHz | - | 10 pA | 120 µV | 7.5mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMH6502MAX/NOPBIC VARIABLE GAIN 1 CIRC 14SOIC |
4,824 |
|
Datasheet |
LMH® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Variable Gain | 1 | - | 1800V/µs | - | 130 MHz | 9 µA | - | 27mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
ADA4805-2TRMZ-EPR7ADA4805 - ULTRA LOW POWER 120MHZ |
192 |
|
Datasheet |
- | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | Rail-to-Rail | 250V/µs | - | 120 MHz | 550 nA | 13 µV | 570µA (x2 Channels) | 58 mA | 3 V | 5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LT1260CS#TRPBFIC OPAMP CFA 3 CIRCUIT 16SO |
159 |
|
Datasheet |
LT® | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 1600V/µs | 130 MHz | 130 MHz | 20 µA | 2 mV | 5mA (x3 Channels) | 60 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
INA129PINA129 PRECISION, LOW POWER INST |
484 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 4V/µs | - | 1.3 MHz | 20 nA | 10 µV | 700µA | 15 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LT1221CN8#PBFLT1221 - VERY HI SPEED OA (AV=4) |
1,076 |
|
Datasheet |
C-Load™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 250V/µs | 150 MHz | - | 100 nA | 200 µV | 8mA | 26 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LMH6503MA/NOPBLMH6503 WIDEBAND, LOW POWER, LIN |
573 |
|
Datasheet |
LMH® | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Variable Gain | 1 | - | 1800V/µs | - | 135 MHz | 11 µA | - | 37mA | 90 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
LT1215CS8LT1215 - OP AMP GENERAL PURPOSE |
300 |
|
Datasheet |
LT® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 50V/µs | 23 MHz | - | 420 nA | 250 µV | 5.7mA (x2 Channels) | 50 mA | 2.5 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LMH6881SQ/NOPBIC OPAMP DIFF 1 CIRCUIT 24WQFN |
45,463 |
|
Datasheet |
- | 24-WFQFN Exposed Pad | Bulk | Active | Differential | 1 | Differential | - | - | 2.4 GHz | - | - | 100mA | - | 4.75 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 24-WQFN (4x4) |
|
OP37GN8#PBFIC OPAMP GP 1 CIRCUIT 8DIP |
1,650 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 17V/µs | 63 MHz | - | 15 nA | 30 µV | - | - | 8 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 8-PDIP |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.