| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
EL8201ISZ-T7IC OPAMP GP 2 CIRCUIT 8SOIC |
500 |
|
Datasheet |
EL8201 | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 200V/µs | 100 MHz | 200 MHz | 1.6 µA | 800 µV | 2mA (x2 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
LT6013IDD#PBFLT6013 - MICROPOWER PRECISION R- |
363 |
|
Datasheet |
* | 8-WFDFN Exposed Pad | Bulk | Obsolete | General Purpose | 1 | - | 0.2V/µs | 1.4 MHz | - | 100 pA | 30 µV | 200µA | 20 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
HA3-2605-512MHZ, HIGH INPUT IMPEDANCE OPER |
159 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 7V/µs | 12 MHz | - | 5 pA | 3 mV | 3mA | 18 mA | 45 V | 45 V | 0°C ~ 75°C | - | - | Through Hole | 8-PDIP |
|
LTC2051IDDLTC2051 - 2X ZERO-DRIFT OP AMPS |
2,032 |
|
Datasheet |
- | 8-WFDFN Exposed Pad | Bulk | Active | Chopper (Zero-Drift) | 2 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x2 Channels) | - | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
LT1620CS8#PBFLT1620 - R-TO-R CURRENT SENSE AM |
223 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Sense | 1 | - | - | - | - | 4 mA | 8 mV | 2.8mA | - | 4.5 V | 5.5 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SO |
|
HFA1120IB850MHZ, LOW DISTORTION CURRENT F |
3,316 |
|
Datasheet |
- | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 2300V/µs | - | 670 MHz | 12 µA | 2 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL5371IUZEL5371 - TRIPLE 250MHZ DIFFERENT |
1,795 |
|
Datasheet |
- | 28-SSOP (0.154", 3.90mm Width) | Bulk | Active | Differential | 3 | Differential | 700V/µs | 100 MHz | 250 MHz | 3 µA | 1.5 mV | 7.5mA (x3 Channels) | 120 mA | 4.75 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 28-QSOP |
|
LMC6462BIN/NOPBLMC6462 DUAL MICROPOWER, RAIL-TO |
3,394 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.028V/µs | 50 kHz | - | 0.15 pA | 250 µV | 50µA (x2 Channels) | 75 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
LT1672CS8#PBFLT1672 - PRECISION RAIL-TO-RAIL |
200 |
|
Datasheet |
Over-The-Top® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
OPA2695IDROPA2695 - ULTRA-WIDEBAND, CURREN |
3,670 |
|
Datasheet |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LMH6702MALMH6702 1.7 GHZ, ULTRA LOW DISTO |
14,734 |
|
Datasheet |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LTC6102HVCDD#PBFPRECISION ZERO DRIFT CURRENT SEN |
544 |
|
Datasheet |
- | 8-WFDFN Exposed Pad | Bulk | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 5 V | 100 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
HA1-2405-7OPERATIONAL AMPLIFIER, 1 FUNC, 1 |
1,794 |
|
Datasheet |
* | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
EL8302IUZ-T13IC OPAMP GP 3 CIRCUIT 16QSOP |
25,000 |
|
Datasheet |
- | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 3 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA (x3 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
EL8302IUZ-T13IC OPAMP GP 3 CIRCUIT 16QSOP |
20,000 |
|
Datasheet |
- | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 3 | Rail-to-Rail | 600V/µs | 200 MHz | 500 MHz | 6 µA | 800 µV | 5.6mA (x3 Channels) | 65 mA | 3 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
|
LT1991IDD#TRPBFLT1991 - PRECISION DIFFERENCE AM |
6,554 |
|
Datasheet |
- | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 110 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
LT1996IDD#PBFLT1996 - PRECISION, 100UA GAIN S |
1,210 |
|
Datasheet |
* | 10-WFDFN Exposed Pad | Bulk | Obsolete | Programmable Gain | 1 | - | 0.12V/µs | 560 kHz | 38 kHz | 2.5 nA | 25 µV | 130µA | 21 mA | 2.7 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
EL5364IUZ-T7IC OPAMP CFA 3 CIRCUIT 16QSOP |
2,000 |
|
Datasheet |
EL5364 | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 3 | - | 4200V/µs | - | 600 MHz | 2 µA | 1.5 mV | 3.5mA (x3 Channels) | 140 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QSOP |
|
OP15FN8#PBFOP15 - HIGH PERF JFET OP AMP |
950 |
|
Datasheet |
- | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 11V/µs | 5.7 kHz | - | 30 pA | 400 µV | 2.7mA | - | 20 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT6010ACDD#PBFLT6010 - RAIL-TO-RAIL OUTPUT PRE |
363 |
|
Datasheet |
- | 8-WFDFN Exposed Pad | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 2 nA | 20 µV | 260µA | 20 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
FPGAX is a global sourcing partner specializing in FPGA and programmable logic solutions for engineering and manufacturing organizations worldwide. For customers sourcing Instrumentation, Op Amps, Buffer Amps components, we support both current production requirements and long-term component availability across demanding product lifecycles.
Our sourcing approach combines traceability, supply stability, and technical coordination. FPGAX is certified to AS9120B, ISO 9001:2008, and ISO 14001 standards and supports procurement programs where continuity, documentation, and dependable component supply are important.
| Requirement | FPGAX Support |
| Current production | Active FPGA, programmable logic, and semiconductor component sourcing |
| Legacy programs | End-of-life and hard-to-find component sourcing |
| Supply continuity | Lifecycle transition and long-term availability support |
| Quality requirements | Traceable sourcing and quality-management processes |
FPGAX focuses on helping customers maintain access to critical programmable devices throughout the full component lifecycle. Whether the requirement is for a current design, an established production program, or an older platform facing component obsolescence, our goal is to provide a stable sourcing path and help customers maintain design and manufacturing continuity.
Yes. FPGAX supports sourcing for both active components and end-of-life or hard-to-find parts, with an emphasis on maintaining supply continuity for engineering and manufacturing programs.
Our core sourcing coverage includes major FPGA and programmable logic manufacturers such as Xilinx, Intel/Altera, Lattice, Microchip, and QuickLogic, subject to specific part requirements and availability.
We support customers through lifecycle transitions by helping locate current or legacy supply, reducing exposure to supply disruptions, and supporting long-term availability for designs that need to remain in production.
FPGAX states certification to AS9120B, ISO 9001:2008, and ISO 14001 standards. Our sourcing services are structured around traceability, stable supply, and quality-management requirements.
Providing the manufacturer part number, required quantity, target delivery schedule, and any lifecycle or traceability requirements helps us evaluate the sourcing request more efficiently.